Février 2009 (DTU P 06-002) La présente édition des Règles NV 65 incorpore tous les modificatifs publiés à ce jour dont le modificatif n° 4 de février 2009. Ce modificatif n° 4 modifie les cartes « vent » et « neige » des Règles NV 65 pour assurer la cohérence avec l’Eurocode 1. Il fait suite au modificatif n° 2 de décembre 1999, relatif à la modification de la carte « vent »...
Indian Standard IS:875 (Part 3) - 1987 Sixth Reprint NOVEMBER 1998 Scope Terminology General Wind speed and pressure Nature of wind in atmosphere Basic wind speed Off-shore wind velocity Wind pressureasn d forceso n buildxncsistructures General Pressure coefficients Force coefficients Dynamic effects General Motion due to vortex shedding Gust factor or gust effectiveness factor...
Australian/New Zealand Standard Structural design actions Part 2: Wind actions Originated in Australia as part of AS CA 1-1933. Originated in New Zealand as part of NZS 1900:1964. Previous Australian edition AS 1170.2-1989. Previous New Zealand edition NZS 4203: 1992. AS 1170.2-1989 and NZS 4203:1992 jointly revised. amalgamated and redesignated in part as AS/NZS 1170.2:2002....
Hong Kong: Buildings department, 2004. — 27 p. The Code of Practice on Wind Effects in Hong Kong 2004, prepared under the direction of the Ad hoc Committee on Review of the Code of Practice on Wind Effects, supersedes the The Code of Practice on Wind Effects Hong Kong - 1983. Scope Definitions Calculation of wind loads Design wind pressures Forces on buildings Forces on...
Dubai Municipality, 2013. — 25 p. This document gives the minimum loads that will be considered when designing structures for wind, including the main structural system, external facade elements, and other components that are exposed to wind. The development of a structural design code is a long and continuous process that requires consensus from all parties involved. This code...
UDC 624-152-632-9:624-04. — Indian Standards Institution, 1980. — 24 p. + 2 p. of amendments (July 1984). This Indian Standard was adopted by the Indian Standards Institution on 26 May 1980, after the draft finalized by the Foundation Engineering Sectional Committee had been approved by the Civil Engineering Division Council. Diaphragm walls are subjected to large horizontal...
Washington, DC: McGraw-Hill Education, 2012. — 20 p. — ISBN: 978-0-07-180131-7 This publication offers the code user a resource that addresses much of the intent and application principles of the major provisions of the 2012 International Building Code (IBC).
Printed in the USA. 2006 -664 p. The International Codes are designed and promulgated to be adopted by reference by ordinance. Jurisdictions wishing to adopt the 2006 International Building Code as an enforceable regulation governing structures and premises should ensure that certain factual information is included in the adopting ordinance at the time adoption is being...
1988, Moscow. Ministry of oil refinery and petrochemical industry of the USSR Departmental norms for process design-45 p. Instead of VNTP-28-79 Present Departmental instructions are not newly developed normative documents. The content of the Departmental instructions is identical to the content of “Fire-fighting norms for design of oil refinery and petrochemical industry...
Third printing. — Printed in the USA. Date of publication April 1997. — 510 p. The uniform building code is dedicated to the development of better building construction and greater safety to the public by uniformity in building laws. The code is founded on board-based principals that the use of new materials and new construction systems.
Printed in the USA. 2011. Internationally, code officials recognize the need for a modern, up-to-date building code addressing the design and installation of building systems through requirements emphasizing performance. The International Building Code, in this 2012 edition, is designed to meet these needs through model code regulations that safeguard the public health and...
The present standard covers steel welded vessels and apparatus (further referred to as vessels), operating under pressure not higher than 21 MPa, vacuum residual pressure not lower than 665 Pa (5 mm Hg) or without pressure (for loading) with the wall temperature not below minus 70 °C, designed for process units in chemical, petrochemical, oil refining, oil, gas and other...
Standard, Committee of Technical Regulations and Metrology under the Ministry of Industry and Trade of the Republic of Kazakhstan, Astana 2007, 17 p. This Standard applies to crude petroleum produced in the Republic of Kazakhstan. The provisions of this standard establish technical requirements and petroleum classification for supply to consumers of the Republic of Kazakhstan...
Australian/New Zealand Standard. Originated in Australia as part of AS 2063-1977. Originated in New Zealand as NZS 5439:1986. Previous edition AS/NZS 2063: 1996. Second edition 2008. Reissued incorporating Amendment No.1 (December 2009). 22 p. This Standard specifies construction requirements and the basic performance requirements for impact energy attenuation, helmet...
New Zealand Standard (NZS). Superseding NZS 4510:1998. 127 p. This Standard specifies requirements for the design, installation, commissioning, and testing of building hydrant systems. The primary purpose of the system shall be to allow water supplied by fire service pumping appliances to the inlet to be reticulated to building hydrant outlets within the building and located to...
This standard shall apply to copper II sulphite pentahydrate, which represents itself as a blue crystal powder, soluble in water, diluted alcohol, concentrated hydrochloric acid and is exposed to air efflorescence.
Design Guide: CompactPCI PlusIO as a link for CompactPCI / CompactPCI Serial Hybrid Systems. PICMG 2.30 CompactPCI PlusIO is based on the basic CompactPCI standard PICMG 2.0. The basic standard PICMG 2.0 is complemented by PICMG 2.30. This complement defines the pin assignment and the function of the user pins on the J2 connector for 32-bit system slots. With PICMG 2.0, the...
October 1, 1999 Copyright 1995, 1996, 1997, 2001 PCI Industrial Computer Manufacturers Group. NOTE: This short form specification is a subset of the CompactPCI Power Interface specification, PICMG 2.11 R 1.0.
European requirements for maintaining the airworthiness of aircraft. This Regulation establishes common technical requirements and administrative procedures for ensuring the continuing airworthiness of aircraft, including any component for installation thereto, which are: (a) registered in a Member State; or (b) registered in a third country and used by an operator for which a...
Publisher: Bureau International de Metrologie Legale. Number of pages: 70. This publication - reference OIML R 137-1 & -2, Edition 2012 - was developed by Technical Subcommittee TC 8/SC 7 Gas meters. It was approved online for final publication by the International Committee of Legal Metrology in 2012 and will be submitted to the International Conference of Legal Metrology in...
Publisher: Bureau International de Metrologie Legale. Number of pages: 48. This publication - reference OIML R 137-1, Edition 2006 - was developed by Technical Subcommittee TC 8/SC 8 Gas meters. It was approved for final publication by the International Committee of Legal Metrology in 2006 and will be submitted to the International Conference of Legal Metrology in 2008 for...
In English. Number of pages: 24. This Indian Standard was adopted by the Bureau of Indian Standards, after the draft finalized by the Weights and Measures Sectional Committee had been approved by the Production and General Engineering Division Council. This standard is taken for measuring the gas consumption at bulk supplier as well as the users’ end when the gas is supplied...
In English. Number of pages: 20. This Indian Standard was adopted by the Bureau of Indian Standards, after the drafl finalized by the Weights and Measures Sectional Committee had been approved by the Production and General Engineering Division Council. This standard is taken for measuring the gas consumption at the bulk suppliers as well as at the users’ end, when the gas is...
Uniform standards of professional appraisal practice 2008-2009 (Uspap) The Financial Institutions Reform, Recovery and Enforcement Act of 1989 recognizes USPAP as the generally accepted appraisal standards and requires USPAP compliance for appraisers in federally related transactions. State Appraiser Certification and Licensing Boards, federal, state, and local agencies,...
Introduction the international valuation standards Ivsc code of conduct Concepts fundamental to generally accepted valuation principles Property types The International Valuation Standards Committee has become a truly international body in terms of both its membership and mission. The Committee, which was founded with a membership of twenty national associations, has grown by...
Market value basis of valuation Bases other than market value Valuation reporting Valuations are developed on the basis of the Market Value of an asset or on bases other than Market Value. Central to all valuations are the concepts of market, price, cost and value. These concepts are relevant both to valuations based on Market Value and those based on non-market criteria. Of...
National Standard of the People's Republic of China . 2007. 58 p. This standard specifies the terms and definitions, ordering information, dimensions, shapes, masses and tolerance, technical requirements, testing methods, inspection rules, marking and quality certificate, quality assurance for hot rolled steel rails for railway. This standard apply to railway that was...
Comprenant tout le texte valide jusqu’à: Rectificatif 1 de la série 03 d'amendements - Date d'entrée en vigueur: 10 mars 2010 Complément 1 à la série 03 des amendements - Date d'entrée en vigueur: 09 décembre 2010 Série 04 d'amendements au Règlement - 28 octobre 2011 Rectificatif 1 de la série 04 d'amendements - Date d'entrée en vigueur: 28 octobre 2011 Le présent Règlement...
Incorporating all valid text up to: Corrigendum 1 to the 03 series of amendments - Date of entry into force: 10 March 2010 Supplement 1 to the 03 series of amendments - Date of entry into force: 09 December 2010 04 series of amendments - 28 October 2011 Corrigendum 1 to the Revision 4 - Date of entry into force: 28 October 2011 This Regulation applies to: - Vehicles of...
Official publication. Kyiv: Derzhspozhyvchstandart of Ukraine, 2010. - 14 p. Free translation from Ukrainian Approved and enters into force by the Order of Derzhspozhyvchstandart of Ukraine (the State Standard Committee) #108 dated 31 March 2010. Replaces DSTU 3768-2009. The present standard applies to Common wheat (Triticum aestivum L.) and Durum wheat (Triticum durum Desf.)...
Kiev: Derzhspozhyvstandard of Ukraine, 15 p. Field of use. Normative references. Technical requirements. Safety requirements. Requirements on environment protection. Marking. Packing. Rules of transportation and storage. Methods of control. Rules of acceptance. Guarantees of producer. Supplements: List of SSU codes in accordance with State Classifier 016. Feed value and caloric...
ASTM International, 2004. - 669 p. ISBN: 0803133626 Third Edition This publication assists the reader by grouping comparable steels based on their chemical composition and/or mechanical properties according to a detailed set of rules. It also takes into account product form, application, and type of service, and aids in finding the new CEN standards that have replaced former...
ITU-T recommendation V.25 ter codifies the most common commands used by DTE to control DCE on asynchronous DTE-DCE connections. Recommendation V.25 ter also codifies the syntax to be used by standards committees for extending this command in various ways. Supplement to ITU Recommendation V.25 ter was prepared by ITU-T Study Group 14 (1993-1996) and was approved under the WTSC...
ITU-T recommendation T.50 specifies the International Reference Alphabet (IRA, formerly International Alphabet No. 5, IA5), a character set encoding. ASCII is the U.S. variant of that character set. The original version from November 1988 corresponds to ISO 646. The current version is from September 1992.
The present document defines IP Interworking (IPI) between two TETRA networks for the transfer of IP data while MS migrates from one SwMI to another. The present document defines the use of GPRS Tunnelling Protocol (GTP), the Gateway GPRS Support Node (GGSN) and ISI for IPI. The present document proposes limited extension to SNDCP of the TETRA Air Interface and ISI in order to...
National Standard of PRC. The standard has revised GB/T 3077-1988 The Technical Conditions of Alloy Structure Steel. 1999. 20 p. The standard covers the following issues of hot rolled and forging alloy steel: the dimension, shape, weight, tolerance, engineering specification, test method, inspection rules, packaging, marking, and quality certificates.
Baltimore, MD 2002. ASTM DS67A, 2nd Edition. 658 p. ISBN: 0-8031-3042-2 Language: English. When comparing steel standards from different national and international standard development organizations (SDOs), there is no such thing as "equivalent" steel standards. At best, one may be able to group "comparable" steel standards together based on some defined set of rules, which has...
2 p. SPD/TVSS Changes Effective September 29, 2009 UL 1449 has undergone extensive revision as surge suppression’s standard for safety. UL 1449 Third Edition, defines performance testing and nomenclature, which effectively reboots the surge industry. UL 1449’s performance testing provides a way to compare newly evaluated Surge Protective Devices (SPDs), formerly known as...
JCGM/WG 2 Document N318 (Eng; French) Final draft 2006-08-01 In 1997 the Joint Committee for Guides in Metrology (JCGM), chaired by the Director of the BIPM, was formed by the seven International Organizations that had prepared the original versions of the Guide to the Expression of Uncertainty in Measurement (GUM) and the International Vocabulary of Basic and General Terms in...
Comments