This part of BS 6920 describes a method for identifying organic chemicals that are amenable to GCMS analysis using the techniques described and which might leach from a product into water intended for human consumption. A method of calculating the concentrations of the organic substances identified is also provided. This part of this British Standard is not applicable to the...
This part of BS 6920 describes methods designed to assess the ability of a non-metallic product to affect hot and boiling water intended for human consumption by imparting a discernible odour or flavour, or any noticeable colour or turbidity. It is also applicable in assessing the leachability in hot or boiling water of metals from non-metallic products and the extraction from...
This section of BS 6920 specifies the test procedure for assessing the leachability of metals from non-metallic products when used in contact with water intended for human consumption.
This section of BS 6920 specifies a screening procedure (simple cytotoxicity test) using a mammalian cell line and a leachate from a product. The results of this procedure will assist in the toxicological assessment of the product for use in contact with water intended for human consumption.
This section of BS 6920 specifies a method for assessing the ability of a product to promote the multiplication of aerobic aquatic microorganisms in water intended for human consumption. The method is applicable to all types of non-metallic product used in contact with water intended for human consumption.
This section of BS 6920 describes a method designed to assess the ability of a product to impart any noticeable colour or turbidity to water intended for human consumption. The method is applicable to all types of non-metallic product used in contact with water intended for human consumption.
Describes a method designed to assess the ability of flexible hoses (including reinforcements) to impart a discernible odour or flavour to water intended for use in the preparation of food and drinks. Applicable only to the testing of hoses intended for installation in equipment used for food and drink preparation.
This subsection of BS 6920 describes a method designed to assess the ability of multi-layered hoses (including reinforcements) and pipes to impart a discernible odour or flavour to water intended for human consumption.
This subsection of BS 6920 describes a method designed to assess the ability of a product to impart a discernible odour and/or flavour to water intended for human consumption. The method is applicable for most types of non-metallic products used in contact with drinking water.
This section of BS 6920 describes the preparation of test samples of all types of non-metallic (including cementitious) materials and products, including water fittings and components, pipes and materials used in coating, protection, lining,jointing, sealing and lubrication, for their suitability for use in contact with water intended for human consumption, with regard to their...
This part of BS 6920 specifies requirements for the suitability of non-metallic (including cementitious) materials and products, and also water fittings and components, pipes and materials used in coating, protection, lining, jointing,sealing and lubrication, for use in contact with either hot or cold water intended for human consumption, with regard to their effect on the...
This British Standard gives methods for the calculation of the carbon dioxide emission factor of natural gases, natural gas substitutes and other combustible gaseous fuels, when the composition of the gas by mole fraction is known. The method provides for the calculation of the carbon dioxide emission factor at the commonly used reference conditions of temperature and pressure...
Noise control in and around buildings is discussed in this British Standard guide on an objective and quantifiable basis as far as is currently possible. For many common situations, this guide suggests criteria, such as suitable sleeping/resting conditions, and proposes noise levels that normally satisfy these criteria for most people. However, it is necessary to remember that...
This British Standard specifies requirements for commercial butane andcommercial propane as supplied for general domestic and industrial fuelpurposes. It applies to these products in cylinders and in bulk. It does not cover gases for testing gas appliances.
Standard Number BS 6912-6:1992, ISO 3449:1992 Title Safety of earth-moving machinery. Specification for falling-object protective structures on earth-moving machinery: Laboratory tests and performance requirements Status Superseded, Withdrawn Publication Date 15 November 1992 Withdrawn Date 15 December 2000 Cross References BS 5495, BS 5527:Part 1, BS 5538, BS 6104:Part 1, BS...
Standard Number BS 6912-4:1991, ISO 10264:1990 Title Safety of earth-moving machinery. Specification for key-locked starting systems Status Current Publication Date 28 February 1991 Cross References BS 6914:Part 1 International Relationships ISO 10264:1990 Draft Superseded By 89/17433 DC Descriptors Earth-moving equipment, Equipment safety, Safety measures, Materials handling...
Standard Number BS 6912-3:1990, ISO 9533:1989 Title Safety of earth-moving machinery. Sound test method for machine-mounted forward and reverse warning alarm Status Superseded, Withdrawn Publication Date 31 October 1990 Withdrawn Date 31 August 2010 Cross References BS 5631, BS 5969, BS 6812:Part 1, BS 6812:Part 2, BS 6914:Part 1, BS 7025, ISO 4872, ISO 6081 Replaced By BS ISO...
Standard Number BS 6912-2:1989, ISO 5998:1986 Title Safety of earth-moving machinery. Specification for rated operating load for crawler and wheel loaders Status Withdrawn Publication Date 31 August 1989 Confirm Date 15 June 2001 Withdrawn Date 01 January 2012 Cross References BS 6422, BS 6819 International Relationships ISO 5998:1986 Draft Superseded By 88/13265 Descriptors...
Standard Number BS 6912-1:1997, ISO 8643:1997 Title Safety of earth-moving machinery. Specification for hydraulic excavator and backhoe loader boom lowering control device Status Superseded, Withdrawn Publication Date 15 December 1997 Withdrawn Date 28 February 2017 Cross References ISO 6165:1997 Replaced By BS ISO 8643:2017 Replaces BS 6912-1:1988, ISO 8643:1988 International...
BS 4211 is a British Standard which specifies requirements for ladders with single bar rungs intended to be fixed permanently to structures. It covers ladders fixed to, for example, chimneys, silos and bins. Requirements for associated platforms and safety hoops are also given. BS 4211 also covers permanently fixed companionway ladders. Contents of BS 4211: Scope Normative...
British Standard Institution, 1987. — 15 p. This Part of BS 6755 embodies the technical content of API Specification 6FA for fire type-testing of valves, including valves to API Specification 6D, and of API Standard 607, published by the American Petroleum Institute (API), but differs in presentation. It covers the requirements for testing and method of test for evaluating the...
BS 8888 is the UK’s national framework standard for engineering drawings and geometrical tolerancing. It covers all of the requirements for the technical specification of products and their component parts. It explains the way in which engineering drawings outline and present these specifications. It covers all of the symbology and information that engineers and designers need...
BS EN 15224:2016 specifies requirements for a quality management system when a healthcare organization: - needs to demonstrate its ability to consistently provide healthcare product or service that meets customer and applicable statutory and regulatory requirements, and -aims to enhance customer satisfaction through the effective application of the system, including processes...
This Published Document is the UK implementation of CEN/TR 16832:2015. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 April 2015. — 56 p. — ISBN: 978 0 580 88641 6. This Technical Report sets out guidance for the selection, use, care and maintenance of clothing and related items of personal protective equipment...
This Published Document is the UK implementation of ISO/TS 16976-8:2013. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 June 2013. — 28 p. — ISBN: 978 0 580 78771 3. ISO/TS 16976 provides information on factors related to human physiology, ergonomics and performance for the preparation of standards for performance...
This Published Document is the UK implementation of ISO/TS 16976-7:2013. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 May 2013. — 24 p. — ISBN: 978 0 580 78770 6. This part of ISO/TS 16976 contains information related to the interaction between respiratory protective devices and the human body functions of...
This Published Document is the UK implementation of ISO/TS 16976-6:2014. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 July 2014. — 24 p. — ISBN: 978 0 580 82285 8. This part of ISO/TS 16976 provides information on the psycho-chysiological effects related to the wearing of respiratory protective devices (RPD) and...
This Published Document is the UK implementation of ISO/TS 16976-5:2013. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 October 2013. — 26 p. — ISBN: 978 0 580 75106 6. This part of ISO 16976 is one of a series of Technical Specifications that provide information on factors related to human anthropometry,...
This Published Document is the UK implementation of ISO/TS 16976-2:2015. It superdedes DD ISO/TS 16976-2:2010 which is withdrawn. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 May 2015. — 34 p. — ISBN: 978 0 580 89493 0. This part of ISO/TS 16976 is one part of a series of Technical Specifications that provide...
This Published Document is the UK implementation of ISO/TS 16976-1:2015. It supersedes DD ISO/TS 16976-1:2007 which is withdrawn. This Published Document was published under the authority of the Standards Policy and Strategy Committee on 31 December 2015. — 28 p. — ISBN: 978 0 580 88531 0. This part of ISO/TS 16976 provides information on factors related to human anthropometry,...
Incorporating Amendment № 1. This British Standard, having been prepared under the Environment Sector Board, was published under the authority of the Standards Board and comes into effect on 15 December 1997. — 64 p. — ISBN: 0 580 28915 X. This British Standard gives guidance on implementing effective respiratory protective device programmes intended to protect against either...
Incorporating Amendment № 1. This British Standard, having been prepared under the direction of the Rubber Standards Policy Committee, was published under the authority of the Board of BSI and comes into effect on 30 March 1990. — 12 p. — ISBN: 0 580 17769 6. This British Standard specifies requirements for lined lightweight rubber overshoes and overboots with defined...
British Standards Institution (BSI), 1996. — 16 p. — ISBN: 0-580-26239-1 Loading for buildings. Part 1: Code of practice for dead and imposed loads (16 p.). This Part of BS 6399 gives dead and minimum recommended imposed loads. Applies to new buildings, alterations to existing structures and existing construction on change of use. Published Date: 1996-09-15 Status: Current...
British Standards Institution (BSI), 1997. — 124 p. — ISBN: 0-580-27447-0 Loading for buildings. Part 2: Code of practice for wind loads (124 p.). This Part of BS 6399, having been prepared under the directionof the Building and Civil Engineering Sector Board, was published under the authority of the Standards Boardand comes into effect on 15 July 1997. Published Date:...
British Standards Institution (BSI), 1988. — 30 p. — ISBN: 0-580-16577-9 Loading for buildings. Part 3: Code of practice for imposed roof loads (30 p.). This Part of BS 6399 for use in designing buildings and building components which are to be constructed and used in the U.K. and the Channel Islands.7. Published Date: 1988-05-31 Status: Current Replaces: BS 6399:Part 1:1984
British Standards Institution (BSI), 1995. — 30 p. This British Stndard specifies the dimensions and certain other properties of endless wedge belts and V-belts and their and their corresponding grooved pulleys, when used for power transmission.
This British Standard specifies the materials, dimensions and inspection requirements for D-slot recess, corrosion-resisting steel bolts with 100° countersunk heads and unified threads for aircraft (Strength Class 880 MPa).
Publisher: BSI Publish Date: 2009 Pages: 154 Language: English Format: PDF Document Scope This standard provides terms, symbols and definitions for welding, brazing and thermal cutting of metals. Some definitions might also apply to non-metals. It does not cover mechanically fastened or adhesive bonded joints. This standard is intended for designers, those drafting welding...
Publisher: BSI Standards Publication Publish Date: 2013 (Ammendment 2015) Pages: 492 Language: English Format: PDF ICS 25.160.40 ISBN: 978-0-580-91721-9 Size: 13 397 kB Scope The scope of the BS 7910 procedure is to guide the user in assessing the acceptability of flaws in metallic structures. The procedure can be used in two ways: - to perform an assessment of an existing flaw...
British Standards Institution (BSI). 1990, 14 p. This British Standard specifies requirements for chain blocks that require the use of a hand chain both for hoisting and for lowering. It specifies tests and marlang, together with matters relating to the constiuction and classincation of the block.
British Standards Institution (BSI). 1957, 26 p. This British Standard specifies the minimum requirements for the design and testing of fixed overhead runway beams made from rolled sections of steel complying with the requirements of BS 151) and BS 9682). This British Standard applies to the runway beams and their components only: it does not apply to supporting structures, to...
British Standards Institution (BSI). 1989, 111 p. This British Standard specifies requirements for the materials, design, fabrication, erection and testing of I vertical cylindrical welded non-refrigerated steel tanks. The standard applies specifically to the needs of the petroleum industry and the requirements for the design, construction, inspection and testing of tank shells...
British Standards Institution (BSI). 1980, 24 p. This Part of BS 2573 provides the basis for calculating stresses in components of crane mechanisms and specifies the way in which permissible stresses shall be determined. It also gives rules for the selection of proprietary items where these are used as mechanism components.
British Standards Institution (BSI). 1983, 94 p. This Part of BS 2573 specifies the basis for computing stresses in crane structures and the way in which permissible stresses in crane structures shall be determined in order to secure economy in design and reliability in operation. For this purpose it specifies a classification system that enables the purchaser and the...
British Standards Institution (BSI), 1986, 51 p. This British Standard specifies requirements for the design, construction and testing of power-driven mobile and semi-mobile cranes either road wheel mounted, tracked or of fixed base, including any combination of the following characteristics.
British Standards Institution (BSI), 1983, 16 p. This British Standard specifies the dimensions, constructions, safe working loads, testing and marking of wire rope slings for general lifting purposes.
This International Standard applies to the radiation detectors which are installed external to the core of nuclear reactors and which provide electrical input signals to the reactor’s control and instrumentation system. These detectors are usually gas-filled neutron detectors and this standard applies only to that type although many of its principles could be used for others,...
This International Standard applies to instrument and measurement channels which generate a calculation of the mean square voltage (MSV) of a signal arising from a neutron detector, in order to extract from it information relating to the neutron fluence rate of a nuclear reactor. After calibration, this information can be used to derive the relative power and the time constant,...
British Standards Institution (BSI ). This British Standard. First edition. March 1985. ISBN: 0-580-14366-X. 16 p. This Part of BS 4871 specifies requirements for the approval testing of welders to be engaged on the manual, semi-automatic, automatic or mechanized arc welding of those tube to tube-plate joints in metallic materials for which an approved welding procedure has to...
British Standards Institution (BSI ). This British Standard. Fifth edition. April 1999. ISBN: 0-580-28272-4. 32 p. This British Standard specifies requirements for the welding of solution annealed duplex austenitic-ferritic stainless steel pipelines with specified minimum chromium contents in the range 21.0 % to 26.0 %, designed in accordance with BS 8010.
British Standards Institution (BSI ). This British Standard. Second edition. October 1996. ISBN: 0-580-24692-2. 24 p. This Part of BS 638 specifies requirements for single core flexible cables carrying the welding current in arc welding circuits. Section 2 specifies requirements for arc welding cables rated for connection between the industrial arc welding power source and the...
This British Standards provides data and guidance for the design of straight involute splines of 30 pressure angle? tabulates limited dimensions and deals with manufacturing errors and their effect on the fit between mating spline elements
British Standards Institution (BSI). This British Standard is published by BSI and came into effect on 30 November 2009. 32 p. This British Standard gives recommendations for fire performance and fire protection of all types of telecommunications equipment and telecommunications cabling. It covers: a) designing and implementing cabling infrastructures; b) selecting products,...
The European Standard EN ISO/IEC 17025:2005 has the status of a British Standard BSI, 2005. - 28 p. This British Standard was published by BSI. It is the UK implementation of EN ISO/IEC 17025:2005, incorporating Corrigendum October 2006. It is identical with EN ISO/IEC 17025:2005, incorporating Corrigendum August 2006. It supersedes BS EN ISO/IEC 17025:2000 which is withdrawn.
This British Standard, having been prepared under the direction of the Iron and Steel Standards Committee, was published under the authority of the Board of BSI and comes into effect on 31 December 1982. Incorporating Corrigendum No. 1, June 1986. Incorporating Corrigendum No. 2, June 1989. 8 p. ISBN: 0 580 12975 6. This Part of BS 6323, which is used in conjunction with Part 1...
This British Standard, having been prepared under the direction of the Iron and Steel Standards Committee, was published under the authority of the Board of BSI and comes into effect on 31 December 1982. Incorporating Corrigendum No. 1, June 1986. Incorporating Corrigendum No. 2, June 1989. 8 p. ISBN: 0 580 12970 5. This Part of BS 6323, which is used in conjunction with Part 1...
This British Standard, having been prepared under the direction of the Sector Policy and Strategy Committee for Building and Civil Engineering, was published under the authority of the Standards Policy and Strategy Committee on 24 August 2001. 41 p. ISBN: 0 580 33304 3. This part of BS 5950 specifies requirements for the materials, fabrication and erection of structural...
This British Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Committee and comes into effect on 15 March 1999. Incorporating Corrigendum No. 1, 3 October 2002. 47 p. ISBN: 0 580 28269 4. This part of BS 5400 specifies requirements for the materials,...
This British Standard was published under the authority of the Standards Policy and Strategy Committee on 23 December 2004. 12 p. ISBN: 0-580-44712-X. Isolating valves and hydrants installed in underground pipelines primarily carrying water intended for human consumption within the United Kingdom are required to be fitted with a stem cap to enable them to be operated by a...
This part of BS 4592 was published by British Standards Institution (BSI) and came into effect on 29 December 2006. 20 p. ISBN: 0 580 48258 8. This part of BS 4592 specifies requirements for the design, manufacture, supply and installation of solid plates in metal, aluminium and glass reinforced plastics (GRP) intended for use in industrial flooring and stair treads
This part of BS 1722 was published by British Standards Institution (BSI) and came into effect on 30 November 2006. 38 p. ISBN: 0 580 49501 9. This part of BS 1722 specifies requirements for chain link fences and gates and gateposts for use with chain link fences. The gates specified are steel with a provision for chain link infill or other infill if required by the purchaser.
This British Standard was published by British Standards Institution (BSI) and came into effect on 31 October 2006. Incorporating Corrigendum No. 1. 96 p. ISBN: 0 580 49398 9. This British Standard specifies requirements for the preparation of all forms of technical product specification. The requirements cross-refer substantially to International and European Standards which...
BS 1553-1:1977 Graphical symbols for general engineering Part 1: Piping systems and plant (34p) This Part of BS 1553 specifies graphical symbols for use in the creation of flow and piping diagrams for process plant and heating and ventilating installations.
BS 499-1:1991 Welding terms and symbols Part 1: Glossary for welding, brazing and thermal cutting Sixth edition February 1991(128p) This Part of BS 499 has been prepared under the direction of the Welding Standards Policy Committee. This edition introduces technical changes but it does not reflect a full review or revision of the standard, which will be under taken in due...
British Standards Institution (BSI).Third edition June 1991. 38 p. This British Standard specifies requirements for both shop and site class II arc welding of joints in carbon steel pipework intended to carry fluids. It covers manual, automatic or semi-automatic arc welding or combinations of these processes, but it also allows joints to be made with an oxy-acetylene root run...
30 p. PUBLICLY AVAILABLE SPECIFICATION (PAS) This Publicly Available Specification (PAS) has been prepared by the British Standards Institution (BSI) in partnership with BSI Management Systems. This PAS specifies common management system requirements and is intended to be used as a framework for implementing two or more management system standards/specifications in an...
CWA 15740 Risk-Based Inspection and Maintenance Procedures for European Industry (RIMAP) English version.The document formulates the procedure for risk based approach, thereby supporting optimization of operations and maintenance (O&M) as well as asset management.
This British Standard is published by BSI and came into effect on 6 October 2008. It was prepared by Technical Committee FSH/14, Fire precautions in buildings, 459 p., This British Standard gives recommendations and guidance on the design, management and use of buildings to achieve reasonable standards of fire safety for all people in and around buildings. It is not applicable...
Comments