Vernier, Switzerland: ISO copyright office, 2021. — 22 p. This document is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO 14638). It influences chain links A, B, and C of the chain of standards on size, distance, form, orientation, and location.
Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear 1 Scope This part of ISO 3377 specifies a method for determining the tear strength of leather using a double edged tear. The method is sometimes described as the Baumann tear. It is applicable to all types of leather.
Madrid: Asociation Española de Normalization, Junio 2017. — 22 p. Prólogo europeo Declaración Prólogo Introducción Objeto y campo de aplicación Normas para consulta Términos y definiciones Símbolos y términos abreviados Requisitos generales para el ensayo de acondicionamiento Materiales de acondicionamiento Cabina de acondicionamiento Aspectos de seguridad Método de ensayo...
Madrid: Asociation Española de Normalization, Junio 2017. — 31 p. Prólogo europeo Declaración Prólogo Introducción Objeto y campo de aplicación Normas para consulta Términos y definiciones Símbolos y abreviaturas Requisitos generales del dispositivo de ensayo Carga de polvo Equipo de ensayo Cualificación del banco de ensayo y de sus aparatos Procedimiento de carga de polvo para...
Madrid: Asociation Española de Normalization, Junio 2017. — 77 p. Prólogo europeo Declaración Prólogo Introducción Objeto y campo de aplicación Normas para consulta Términos y definiciones Símbolos y abreviaturas Requisitos generales para ensayo Materiales de ensayo Equipo de ensayo Cualificación de los equipos y del banco de ensayo Métodos de ensayo Reducción de datos y...
Madrid: Asociation Española de Normalization, Junio 2017. — 39 p. Prólogo europeo Declaración Prólogo Introducción Objeto y campo de aplicación Normas para consulta Términos y definiciones Símbolos y abreviaturas Especificaciones técnicas y requisitos Métodos de ensayo y procedimientos Sistema de clasificación basado en la eficiencia de las partículas en suspensión (ePM)...
Publication date: 2020-08 Edition: 1 Number of pages: 16 Technical Committee: ISO/TC 145/SC 2 Safety identification, signs, shapes, symbols and colours ICS: 01.080.01 Graphical symbols in general This document serves to complement the basic standards for safety signs: the ISO 3864 series, ISO 7010, ISO 16069, ISO 23601 and ISO 17398, as well as ISO 45001. This document contains...
The International Organization for Standardization (ISO). First edition. 2007-02-15. 24 p. This Technical Specification - defines the rules applicable for the audit and certification of a food safety management system (FSMS) complying with the requirements given in ISO 22000 (or other sets of specified FSMS requirements), and - provides the necessary information and confidence...
The International Organization for Standardization (ISO). First edition. 2010-04-15. 36 p.This Technical Specification provides guidance in defining and implementing processes to monitor and measure customer satisfaction. This Technical Specification is intended for use by organizations regardless of type, size or product provided. The focus of this Technical Specification is...
This International Standard specifies a general method known as the Karl Fischer method, suitable for the determination of free water or water of crystallization in most solid or liquid chemical products, both organic and inorganic
This document outlines the concepts and principles for information management at a stage of maturity described as "building information modeling (BIM) according to the ISO 19650 series". This document provides recommendations for a framework to manage information including exchanging, recording, versioning and organizing for all actors. This document is applicable to the whole...
This document specifies requirements for information management, in the form of a management process, within the context of the delivery phase of assets and the exchanges of information within it, using building information modeling. This document can be applied to all types of assets and by all types and sizes of organizations, regardless of the chosen procurement strategy....
ISO 12647-7:2007 specifies requirements for systems that are used to produce hard-copy digital proof prints intended to simulate a printing condition defined by a set of characterization data. Recommendations are provided with regard to appropriate test methods associated with these requirements. In addition, guidance with respect to the certification of proofing systems...
ISO 12647:2012 specifies the requirements for the exchange of data and information necessary for the definition of the aims for four-colour flexographic printing of packaging and publication materials, including newsprint. It is based on the use of colour characterization data to define the colourimetric printing aims and includes appropriate assignment of responsibility for...
ISO 12647-4:2005 specifies a number of process parameters and their values to be applied to four-colour publication gravure printing. The parameters and values are chosen in view of the complete process covering the process stages colour separation, making of the printing forme, proof production and production printing. ISO 12647-4:2005 is applicable: directly, to publication...
ISO 12647-3:2005 specifies a number of process parameters and their values to be applied when preparing colour separations for newspaper single or four-colour printing and proofing. The parameters and values are chosen in consideration of the complete process, covering the process stages: colour separation, film setting, making of the printing forme, proof production and...
This part of ISO 12647 specifies a number of process parameters and their values to be applied when preparing colour separations for four-colour offset printing or when producing four-colour prints by one of the following methods: heat-set web, sheet-fed or continuous forms process printing, or proofing for these processes; oddset proofing for half-tone gravure.
ISO 12647-1:2004 specify parameters that define printing conditions for the various processes used in the graphic arts industry. Practitioners wishing to work to common goals may use the values of the parameters specified in the exchange of data to characterize the intended printing condition and/or for the process control of printing. ISO 12647-1:2004 defines vocabulary and...
ISO 2846-1:2006 specifies the colour and transparency characteristics that have to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a laboratory printability tester), the defined substrate and a method for testing to ensure conformance are also defined....
This part of ISO 12647 specifies a number of process parameters and their values to be applied when preparing colour separations for four-colour screen process printing when producing four-colour proof and production prints by flat bed or cylinder screen printing.The parameters and values are chosen in view of the complete process covering the following process stages:colour...
ISO 12647-2:2004 specifies a number of process parameters and their values to be applied when preparing colour separations for four-colour offset printing or when producing four-colour prints by one of the following methods: heat-set web, sheet-fed or continuous forms process printing, or proofing for one of these processes; or offset proofing for half-tone gravure. The...
ISO, 2019. — 89 p. Scope Normative references Symbols and abbreviated terms Objectives, planning, and quality management Positioning Seafloor mapping Sub‐seafloor mapping Reporting of seafloor mapping and sub‐seafloor mapping Integration, interpretation and investigation of geohazards Annex A (informative) Additional information and guidance
Status: Withdrawn Publication date : 2014-05. ISO 37120:2014 defines and establishes methodologies for a set of indicators to steer and measure the performance of city services and quality of life. It follows the principles set out and can be used in conjunction with ISO 37101:?, Sustainable development in communities ? Management systems ? General principles and requirements,...
Standard Number BS ISO 2575:2010 Title Road vehicles - Symbols for controls, indicators and tell-tales Status Current, Under review Publication Date 31 July 2010 Cross References ISO 15008, IEC 60417, ISO 3864-1, ISO 7001, ISO 7010, IEC 80416-3, ISO 7000, IEC 80416-1, ISO 80416-2, ISO 80416-4, ISO 3864-4 International Relationships ISO 2575:2010/Amd.7:2017 Amended By Amendment,...
Les principes de management de la qualité qui sous-tendent la famille des normes ISO 9000 (dont fait partie la série ISO 10000) mettent l'accent sur l'importance du management des ressources humaines et la nécessité d'une formation appropriée. Ils reconnaissent que les clients peuvent attacher de l'importance à l'engagement souscrit par un organisme vis-à-vis de ses ressources...
Publication date : 2011-12 Edition: 1 Number of pages : 37 Technical Committee : ISO/IEC JTC 1/SC 7 Software and systems engineering ISO/IEC/IEEE 42010:2011 addresses the creation, analysis and sustainment of architectures of systems through the use of architecture descriptions. A conceptual model of architecture description is established. The required contents of an...
ISO/TR 25901-1:2016 contains general terms and definitions applicable to welding and allied processes. It does not contain terms and definitions related to specific processes or particular aspects of welding and allied processes that are covered in other parts of this Technical Report (see Foreword) or in other ISO standards. In the main body of this part of ISO/TR 25901, terms...
This document provides guidance on auditing management systems, including the principles of auditing, managing an audit programme and conducting management system audits, as well as guidance on the evaluation of competence of individuals involved in the audit process. These activities include the individual(s) managing the audit programme, auditors and audit teams. It is...
ISO 37001:2016 specifies requirements and provides guidance for establishing, implementing, maintaining, reviewing and improving an anti-bribery management system. The system can be stand-alone or can be integrated into an overall management system. ISO 37001:2016 addresses the following in relation to the organization's activities: - bribery in the public, private and...
ISO 50002:2014 specifies the process requirements for carrying out an energy audit in relation to energy performance. It is applicable to all types of establishments and organizations, and all forms of energy and energy use. ISO 50002:2014 specifies the principles of carrying out energy audits, requirements for the common processes during energy audits, and deliverables for...
This document specifies requirements for information management, in the form of a management process, within the context of the delivery phase of assets and the exchanges of information within it, using building information modeling. This document can be applied to all types of assets and by all types and sizes of organizations, regardless of the chosen procurement strategy....
This document outlines the concepts and principles for information management at a stage of maturity described as "building information modeling (BIM) according to the ISO 19650 series". This document provides recommendations for a framework to manage information including exchanging, recording, versioning and organizing for all actors. This document is applicable to the whole...