The International Organization for Standardization (ISO). This Ethiopian Standard has been prepared under the direction of the Technical Committee for Animal and vegetables fats and oils (TC 23) and published by the Ethiopian Standards Agency (ESA). The standard is identical with ISO 3656:2011. 11 p. This International Standard specifies a method for the determination of the...
This Ethiopian Standard has been prepared under the direction of the Technical Committee for Textile Fabrics (TC 70) and published by the Ethiopian Standards Agency (ESA). The standard is identical with ISO 4920:2012, published by International Organization for standardization(ISO). — 10 p. This International Standard specifies a spray test method for determining the resistance...
The International Organization for Standardization (ISO). This Ethiopian Standard has been prepared under the direction of the Technical Committee for paper and pulp Products (TC 3) and published by the Ethiopian Standards Agency (ESA). The standard is identical with ISO 5351:2010. 22 p. This International Standard specifies a method which yields a number that is an estimate of...
Les principes de management de la qualité qui sous-tendent la famille des normes ISO 9000 (dont fait partie la série ISO 10000) mettent l'accent sur l'importance du management des ressources humaines et la nécessité d'une formation appropriée. Ils reconnaissent que les clients peuvent attacher de l'importance à l'engagement souscrit par un organisme vis-à-vis de ses ressources...
Oxford: Elsevier, 2005. — 208 p. — ISBN: 0750668210 Geometrical tolerancing is the standard technique that designers and engineers use to specify and control the form, location and orientation of the features of components and manufactured parts. This innovative book has been created to simplify and codify the use and understanding of geometrical tolerancing. It is a complete,...
ISO 11648-1:2003 Aspects of statistical sampling of bulk materials. Part 1. General principles. This standard was reviewed and then confirmed in 2014. This Indian Standard (Part 1) which is identical to ISO 11648-1:2003 ‘Statistical aspects of sampling from bulk materials — Part 1: General principles’ issued by the International Organization for Standardization (ISO) was...
The International Organization for Standardization (ISO). This Indian Standard (Third Revision) which is identical with ISO 9000:2005 was adopted by the Bureau of Indian Standards. 36 p. This International Standard describes fundamentals of quality management systems, which form the subject of the ISO 9000 family, and defines related terms. This International Standard is...
The International Organization for Standardization (ISO). First edition. 2005-05-15. The text of ISO 16881-1:2005 has been approved by Institute of Standards and Industrial Research of Iran (ISIRI) ISIRI 10363-1 without any modifications. 27 p. This part of ISO 16881 gives the requirements for the selection of the size for iron or steel wheels and presents the formulae for the...
First edition, with amendment № 1. International Standard IS0 10333-1 was prepared by Technical Committee ISOTTC 94, Personal safety - Protective clothing and equipment, Subcommittee SC 4, Personal equipment for protection against falls.Amendment 1 to International Standard IS0 10333-1 :2000 was prepared by Technical Committee ISOITC 94, Personal safety - Protective clothing...
International Organization for Standardization, Geneva; 2006 This part of ISO 10381 describes the methods to be applied when sampling soil from stockpiles. The general character of this part of ISO 10381 is a guideline. Nevertheless, many aspects of the sampling of stockpiles are based on well established methods and consequently are described in a prescriptive manner. This...
Geneva (Switzerland). — 2012. — 51 p. This part of ISO 10628 defines graphical symbols for the preparation of diagrams for the chemical and petrochemical industry. It is a collective application standard of the ISO 14617 series. Scope Normative references Structure of graphical symbols Graphical symbols
This part of ISO 10882 specifies a procedure for sampling airborne particles in the breathing zone of a person who performs welding and allied processes (the operator). It also provides details of relevant standards that specify required characteristics, performance requirements and test methods for workplace air measurement, and augments guidance provided in EN 689 on...
ISO 1101:2017 defines the symbol language for geometrical specification of workpieces and the rules for its interpretation. It provides the foundation for geometrical specification. The illustrations in this document are intended to illustrate how a specification can be fully indicated with visible annotation (including e.g. TEDs). NOTE: Other International Standards referenced...
International Organization for Standardization, Geneva; 2005 ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been...
International Organization for Standardization, Geneva; 2006 Technical Corrigendum 1 to ISO 11074:2005 was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee SC 1, Evaluation of criteria, terminology and codification.
The International Organization for Standardization (ISO). First edition. 1999-10-01. 26 p. This International Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of non-refillable metallic gas cylinders of welded, brazed or seamless construction for compressed, liquefied and dissolved...
The International Organization for Standardization (ISO). First edition. 2000-05-15. 38 p. This part of ISO 11119 specifies requirements for composite gas cylinders up to and including 450 litres water capacity, for the storage and conveyance of compressed or liquefied gases with test pressures up to and including 650 bar 1). The cylinders are constructed in the form of a...
The International Organization for Standardization (ISO). First edition. 2000-05-15. 38 p. This part of ISO 11119 specifies requirements for composite gas cylinders up to and including 450 litres water capacity, for the storage and conveyance of compressed or liquefied gases with test pressures up to and including 650 bar 1). The cylinders are constructed in the form of a...
The International Organization for Standardization (ISO). First edition. 1999-03-15. 40 p. This International Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of refillable quenched and tempered seamless steel tubes of water capacities from 150 I up to and including 3 000 I for...
2005-01-15 This first edition of ISO 11146-1, together with ISO/TR 11146-3 cancels and replaces ISO 11146:1999, the contents of which have been technically revised and augmented. Scope Normative references Coordinate systems Test principles Applicability Beam widths and beam diameter Beam divergence angles Beam propagation ratios Combined measurement of beam waist locations,...
International Organization for Standardization – 2011.- 20 p. ISO 11311:2011 specifies common reference critical values (of which the effective neutron multiplication factor, keff, is equal to 1) for homogeneous water-moderated plutonium-uranium oxide mixtures based on an inter-code comparison of calculated critical values. It is applicable to operations with unirradiated mixed...
International Organization for Standardization – 2011.- 15 p. ISO 11320:2011 provides criteria for emergency preparedness and response to minimize consequences due to a nuclear criticality accident. The criticality safety of operations are evaluated in accordance with ISO 1709. ISO 11320:2011 applies to a site with one or more facilities which might contain significant...
First edition. International Standard ISO 1 1 393-1 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 1 3, Protective clothing. — 18 p. This part of ISO 1 1 393 specifies the test rig to be used to assess the resistance of personal protective equipment to cutting by hand-held chain-saws. It also describes the...
The International Organization for Standardization (ISO). Second edition. 2008-02-15. This second edition cancels and replaces the first edition (ISO 11660-1 :1999), which has been technically revised. 29 p. This part of ISO 11660 establishes the general requirements for access to control stations and other areas of cranes as defined in ISO 4306-1, during normal operations,...
The International Organization for Standardization (ISO). First edition. 1994-08-15. 17 p. This part of ISO 11660 specifies criteria for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails and entrance openings which permit access to and from operator, inspection or maintenance platforms on mobile cranes as defined in ISO 4306-2 and parked in...
The International Organization for Standardization (ISO). Second edition. 2008-02-15. This second edition cancels and replaces the first edition (ISO 11660-3:1999), which has been technically revised. 11 p. This part of ISO 11660 establishes the particular requirements relating to access, guards and restraints for tower cranes as defined in ISO 4306-3. ISO 11660-1 establishes...
This International Standard specifies ultrasonic acceptance levels 2 and 3 for full penetration welded joints in ferritic steels, which correspond to ISO 5817 quality levels B and C. An acceptance level corresponding to ISO 5817 quality level D is not included in this International Standard as ultrasonic testing is generally not requested for this weld quality. These acceptance...
This part of ISO 12151 specifies the general and dimensional requirements for the design and performance of ISO 6149 metric stud-end hose fittings made of carbon steel, for nominal hose inside diameters of 6,3 mm through 38 mm inclusive, in accordance with ISO 4397.
ISO 12647-1:2004 specify parameters that define printing conditions for the various processes used in the graphic arts industry. Practitioners wishing to work to common goals may use the values of the parameters specified in the exchange of data to characterize the intended printing condition and/or for the process control of printing. ISO 12647-1:2004 defines vocabulary and...
ISO 12647-2:2004 specifies a number of process parameters and their values to be applied when preparing colour separations for four-colour offset printing or when producing four-colour prints by one of the following methods: heat-set web, sheet-fed or continuous forms process printing, or proofing for one of these processes; or offset proofing for half-tone gravure. The...
This part of ISO 12647 specifies a number of process parameters and their values to be applied when preparing colour separations for four-colour offset printing or when producing four-colour prints by one of the following methods: heat-set web, sheet-fed or continuous forms process printing, or proofing for these processes; oddset proofing for half-tone gravure.
ISO 12647-3:2005 specifies a number of process parameters and their values to be applied when preparing colour separations for newspaper single or four-colour printing and proofing. The parameters and values are chosen in consideration of the complete process, covering the process stages: colour separation, film setting, making of the printing forme, proof production and...
ISO 12647-4:2005 specifies a number of process parameters and their values to be applied to four-colour publication gravure printing. The parameters and values are chosen in view of the complete process covering the process stages colour separation, making of the printing forme, proof production and production printing. ISO 12647-4:2005 is applicable: directly, to publication...
This part of ISO 12647 specifies a number of process parameters and their values to be applied when preparing colour separations for four-colour screen process printing when producing four-colour proof and production prints by flat bed or cylinder screen printing.The parameters and values are chosen in view of the complete process covering the following process stages:colour...
ISO 12647:2012 specifies the requirements for the exchange of data and information necessary for the definition of the aims for four-colour flexographic printing of packaging and publication materials, including newsprint. It is based on the use of colour characterization data to define the colourimetric printing aims and includes appropriate assignment of responsibility for...
ISO 12647-7:2007 specifies requirements for systems that are used to produce hard-copy digital proof prints intended to simulate a printing condition defined by a set of characterization data. Recommendations are provided with regard to appropriate test methods associated with these requirements. In addition, guidance with respect to the certification of proofing systems...
International Organization for Standardization – 2013.- 41 p. ISO 12749-2:2013 lists unambiguous terms and definitions related to radiological protection concepts in the subject field of nuclear energy. This part of ISO 12749 provides terms and definitions for general nuclear energy concepts dealing with radiological protection and other related concepts, such as means of...
First edition. ISO 13153 was prepared by Technical Committee ISO/TC 205, Building environment design. — 46 p. This International Standard specifies a framework of the design process for energy-saving single-family residential and small commercial buildings, with the energy consumption ratio as the key criterion. It is intended to assist in the development of design guidelines...
International Organization for Standardization – 2012.- 43 p. ISO 13160:2012 specifies the test methods and their associated principles for the measurement of the activity of 90Sr in equilibrium with 90Y, and 89Sr, pure beta-emitting radionuclides, in water samples. Different chemical separation methods are presented to produce strontium and yttrium sources, the activity of...
International Organization for Standardization – 2011.- 21 p. ISO 13161:2011 specifies the measurement of 210Po activity concentration by alpha spectrometry in all kinds of natural waters. The detection limit of this method depends on the volume of the sample, the counting time, the background count rate and the detection efficiency. In the case of drinking water, the analysis...
International Organization for Standardization – 2013.- 24 p. ISO 13163 specifies the determination of lead-210 (210Pb) activity concentration in samples of all types of water using liquid scintillation counting (LSC). For raw and drinking water, the sample should be degassed in order to minimize the ingrowth of 210Pb from radon-222 (222Rn). Using currently available liquid...
International Organization for Standardization – 2013.- 19 p. ISO 13164-4:2015 describes a test method for the determination of radon-222 (222Rn) activity concentration in non-saline waters by extraction and liquid scintillation counting. The radon-222 activity concentrations, which can be measured by this test method utilizing currently available instruments, are at least...
International Organization for Standardization – 2013.- 20 p. ISO 13165-1:2013 specifies the determination of radium-226 (226Ra) activity concentration in non-saline water samples by extraction of its daughter radon-222 (222Rn) and its measurement using liquid scintillation counting. Radium-226 activity concentrations which can be measured by this test method utilizing...
International Organization for Standardization – 2016.- 20 p. ISO 13165-3:2016 specifies the determination of radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-spectrometry (see ISO 18589 3). The method described is suitable for determination of soluble 226Ra activity concentrations greater than 0,02 Bq/L using a sample volume...
International Organization for Standardization – 2014.- 24 p. ISO 13166:2014 specifies the conditions for the determination of uranium isotope activity concentration in samples of environmental water (including sea waters) using alpha-spectrometry and 232U as a yield tracer. A chemical separation is required to separate and purify uranium from a test portion of the sample....
International Organization for Standardization – 2015.- 27 p. ISO 13167:2015 specifies a test method for measuring actinides ( 238 Pu, 239+240 Pu, 241 Am, 242 Cm, 243+244 Cm and 237 Np) in water samples by alpha spectrometry following a chemical separation. The method can be used for any type of environmental study or monitoring. The volume of the test portion required depends...
International Organization for Standardization – 2015.- 22 p. ISO 13168:2015 describes a test method for the simultaneous measurement of tritium and carbon-14 in water samples by liquid scintillation counting of a source obtained by mixing the water sample with a hydrophilic scintillation cocktail. This is considered a screening method because of the potential presence of...
International Organization for Standardization – 2018.- 21 p. ISO 13169:2018 specifies the measurement method for the determination of total activity concentration of uranium isotopes in non-saline waters by extraction and liquid scintillation counting. This method covers the measurement of soluble uranium: isotopes in water in activity concentrations between approximately 2...
International Organization for Standardization – 2013.- 24 p. The primary purpose of ISO 13304-1:2013 is to provide minimum acceptable criteria required to establish procedure of retrospective dosimetry by electron paramagnetic resonance spectroscopy and to report the results. The second purpose is to facilitate the comparison of measurements related to absorbed dose estimation...
Publication details not specified. International standard. Was prepared by Technical Committee ISO/TC. This is a part from standard include mechnical testing. Only from 9 to 13 p. - 5 p.
First edition. International Standard ISO 13995 was prepared by the European Committee for Standardization (CEN) in collaboration with ISO Technical Committee TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). — 30 p. This European...
First edition. ISO 13998 was prepared by the European Committee for Standardization (CEN) in collaboration with ISO Technical Committee TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). — 38 p. This European Standard applies to...
Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification
Publisher: ISO Publish Date: 2015 Pages: 24 Language: English Format: PDF Document Scope This International Standard prescribes requirements for the classification of nickel and nickel-alloy covered electrodes for manual metal arc welding and overlaying. It includes those compositions in which the nickel content exceeds that of any other element.
This International Standard specifies requirements for the classification of gases and gas mixtures used in fusion welding and allied processes including, but not limited to: — tungsten arc welding (Process 141); — gas-shielded metal arc welding (Process 13); — plasma arc welding (Process 15); — plasma arc cutting (Process 83); — laser welding (Process 52); — laser cutting...
International Organization for Standardization, Geneva; 2004 ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been...
This International Standard specifies a method for the determination of mode I interlaminar fracture toughness (critical energy release rate), GIC, of unidirectional fibre-reinforced plastic composites using a double cantilever beam (DCB) specimen. It is applicable to carbon-fibre-reinforced and glass-fibre-reinforced thermosets and thermoplastics.
ISO 15378:2011 specifies requirements for a quality management system for manufacturers of pharmaceutical and medical device primary packaging materials. These organisations need to demonstrate their ability to consistently meet customer requirements, including regulatory requirements and international standards applicable to primary packaging materials for such medicinal...
International Organization for Standardization – 2015.- 34 p. ISO 15382:2015 provides procedures for monitoring the dose to the skin, the extremities, and the lens of the eye. It gives guidance on how to decide if such dosemeters are needed and to ensure that individual monitoring is appropriate to the nature of the exposure, taking practical considerations into account....
First edition. International Standard ISO 15383 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 30 p. This International Standard specifies test methods and minimum requirements for protective gloves to be worn during fire fighting and associated activities where there is a risk of...
Geneva (Switzerland), ISO 2010, p. 44 . This part of ISO 15519 deals with preparation of diagrams and associated documents and data for process industry. Together with rules for the preparation of diagrams and associated documents and data, this part of ISO 15519 includes rules and recommendations for the application of associated standards in diagrams, for example graphical...
This part of ISO 15614 specifies how a preliminary welding procedure specification is qualified by welding procedure tests. It applies to the arc and gas welding of copper and copper alloys in all product forms. This part of ISO 15614 defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical...
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys This document specifies how a preliminary welding procedure specification is qualified by welding procedure tests. Scope This document applies to production welding, repair welding and build-up...
This International Standard specifies acceptance levels for the time-of-flight diffraction technique (TOFD) of These acceptance levels are applicable to indications classified in accordance with ISO 10863. of ISO 5817. full penetration welds in ferritic steels from 6 mm up to 300 mm thickness which correspond to the quality levels
International Organization for Standardization – 2013.- 17 p. ISO 15690:2013 provides recommendations for dealing with discrepancies between dosimeter systems used in parallel, in order to comply with established criteria and national regulations. ISO 15690:2013 gives guidelines for investigating and analysing the discrepancies between the results of personal dosimetry systems,...
This part of ISO 15748 applies to the planning, design and configuration of potable water supply systems on ships, stationary or floating marine structures and inland waterway crafts. This part of ISO 15748 serves to determine the quantity of potable water to be carried on board, the capacity of the pressurized reservoirs and water heaters, the pumping capacity, etc....
ISO 15901-1:2005(E) INTERNATIONAL STANDARD ISO 15901-1 Evaluation of pore size distribution and porosimetry of solid materials by mercury porosimetry and gas adsorption — Part 1: Mercury porosimetry Distribution des dimensions des pores et porosimétrie des matériaux solides par porosimétrie au mercure et par adsorption de gaz — Partie 1: Porosimétrie au mercure First edition...
International Organization for Standardization, Geneva; 2006 ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been...
International Organization for Standardization – 2013.- 35 p. ISO 16117:2013 provides a methodology to estimate a reasonably maximal value of the number of fissions of a postulated criticality accident. The fission number estimate, associated with its postulated criticality accident, impacts the accident emergency planning and response because it is used for the estimation of...
The International Organization for Standardization (ISO). Committee Draft, ISO/TC 20/SC 14 N, Date: 2004-05-20. 39 p. This International Standard defines the design criteria that shall be used for the selection of metallic materials in order to prevent failure due to stress-corrosion cracking (S CC). It classifies alloys for stress-corrosion susceptibility in sodium chloride...
International Organization for Standardization – 2016.- 36 p. ISO 16637:2016 specifies the minimum requirements for the design of professional programmes to monitor workers exposed to the risk of internal contamination via inhalation by the use of radionuclides as unsealed sources in nuclear medicine imaging and therapy departments. It establishes principles for the development...
International Organization for Standardization – 2015.- 50 p. ISO 16638-1:2015 specifies the minimum requirements for the design of professional programmes to monitor workers exposed to uranium compounds. It establishes principles for the development of compatible goals and requirements for monitoring programmes and dose assessment for workers occupationally exposed to internal...
International Organization for Standardization – 2017.- 39 p. ISO 16639:2017 provides guidelines and performance criteria for sampling airborne radioactive substances in the workplace. Emphasis is on health protection of workers in the indoor environment. ISO 16639:2017 provides best practices and performance-based criteria for the use of air sampling devices and systems,...
First edition 2012-04-01 18 p. This International Standard defines the general principles required for the ultrasonic examination of industrial products that permit the transmission of ultrasound. The specific conditions of application and use of ultrasonic examination, which depend on the type of product examined, are described in documents which could include: ⎯ product...
First edition 2012-04-01 46 p. This International Standard specifies the general rules for setting the timebase range and sensitivity (i. e. gain adjustment) of a manually operated ultrasonic flaw detector with A-scan display in order that reproducible measurements may be made of the location and echo height of a reflector. It is applicable to techniques employing a single...
First edition 2012-04-01 14 p. This International Standard specifies the principles of transmission techniques. Transmission techniques can be used for: ⎯ detection of imperfections; ⎯ determination of attenuation. The general principles required for the use of ultrasonic examination of industrial products are described in ISO 16810. The transmission technique is used for...
First edition 2012-04-01 22 p. This International Standard defines the principles for tandem- and longitudinal-longitudinal-transverse (LLT) wave examination for the detection of discontinuities perpendicular to the surface. The general principles required for the ultrasonic examination of industrial products are described in ISO 16810. A list of symbols and equations is given...
First edition 2012-04-01 60 p. This document specifies the general principles and techniques for the characterization and sizing of previously detected discontinuities in order to ensure their evaluation against applicable acceptance criteria. It is applicable, in general terms, to discontinuities in those materials and applications covered by ISO 16810.
First edition 2012-04-01 26 p. This International Standard defines the general principles for the application of the time-of-flight diffraction (TOFD) technique for both detection and sizing of discontinuities in low alloyed carbon steel components. It can also be used for other types of materials, provided the application of the TOFD technique is performed with necessary...
First edition 2012-04-01 24 p. This International Standard specifies methods and acceptance criteria for assessing the performance of instruments formeasuring thickness using pulse-echo ultrasound. This International Standard covers both direct (digital) reading and waveform display types using single or dual element probes. This International Standard can be used for...
International Organization for Standardization. — Second edition. — 1995. — 8 p. Standard specifies the basic principles and limitations which govern operations with fissile materials. Describes general criticality safety criteria for equipment design and for the development of operating controls. Does not cover quality assurance requirements or details of equipment or...
International Organization for Standardization – 2014.- 38 p. ISO 17099:2014 addresses the following: a) confidentiality of personal information for the customer and the laboratory; b) laboratory safety requirements; c) radiation sources, dose rates, and ranges used for establishing the calibration reference dose-effect curves allowing the dose estimation from CBMN assay yields...
Issued - 2004 Language - English Volume - 26 p. Scope - This International Standard specifies the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants and related industrial applications. It covers valves of the nominal sizes DN: - 8, 10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450, 500 corresponding...
International Organization for Standardization, Geneva; 2005 ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been...
This International Standard specifies techniques for the manual ultrasonic testing of fusion-welded joints in metallic materials of thickness greater than or equal to 8 mm which exhibit low ultrasonic attenuation (especially that due to scatter) at object temperatures from 0 °C to 60 °C. It is primarily intended for use on full penetration welded joints where both the welded...
Publisher: ISO Publish Date: 2015 Pages: 20 Language: English Format: PDF Document Scope This International Standard defines eddy current testing techniques for detection of surface breaking and near surface planar discontinuities, mainly in ferritic materials (weld material, heat-affected zones, base material). Eddy current testing can also be specified for use with...
International Organization for Standardization – 2005.- 20 p. ISO 18589-1:2005 Measurement of radioactivity in the environment - Soil - Part 1: General guidelines and definitions This part of ISO 18589 specifies the general requirements to carry out radionuclides tests on soil sample, including sampling. This part of ISO 18589 is addressed to people responsible for determining...
International Organization for Standardization – 2009.- 30 p. This part of ISO 18589 describes a method for measuring plutonium 238 and 239 + 240 isotopes in soil by alpha spectrometry samples using chemical separation techniques. The method can be used for any type of environmental study or monitoring. These techniques can also be used for measurements of very low levels of...
International Organization for Standardization – 2009.- 38 p. This part of ISO 18589 describes the principles for the measurement of the activity of 90Sr in equilibrium with 90Y, and 89Sr, pure beta-emitting radionuclides, in soil samples. Different chemical separation methods are presented to produce strontium and yttrium sources, the activity of which is determined using...
International Organization for Standardization – 2009.- 20 p. This part of ISO 18589 provides a method that allows an estimation of gross radioactivity of alpha- and beta- emitters present in soil samples. It applies, essentially, to systematic inspections based on comparative measurements or to preliminary site studies to guide the testing staff both in the choice of soil...
This document provides guidance on auditing management systems, including the principles of auditing, managing an audit programme and conducting management system audits, as well as guidance on the evaluation of competence of individuals involved in the audit process. These activities include the individual(s) managing the audit programme, auditors and audit teams. It is...
International Organization for Standardization – 2015.- 54 p. ISO 19017:205 is applicable to gamma radiation measurements on radioactive waste. Radioactive waste can be found in different forms and exhibit a wide range of characteristics, including the following: - raw or unconditioned waste, including process waste (filters, resins, control rods, scrap, etc.) and waste from...
ISO 19030-1:2016 outlines general principles for the measurement of changes in hull and propeller performance and defines a set of performance indicators for hull and propeller maintenance, repair and retrofit activities. The general principles outlined and performance indicators defined are applicable to all ship types driven by conventional fixed pitch propellers, where the...
ISO 19030-2:2016 defines the default method for measuring changes in hull and propeller performance and calculating a set of basic performance indicators. Finally, it provides guidance on the expected accuracy of each performance indicator. ISO 19030-2:2016 is applicable for commercial ship types of the displacement type driven by conventional fixed pitch propeller(s) where the...
ISO 19030-3:2016 outlines alternatives to the default method. Some will result in lower overall accuracy but increase applicability of the standard. Others can result in same or higher overall accuracy but includes elements which are not yet broadly used in commercial shipping. The general principles outlined and performance indicators defined are applicable to all ship types...
International Organization for Standardization – 2014.- 34 p. ISO 19238:2014 provides criteria for quality assurance and quality control, evaluation of the performance, and the accreditation of biological dosimetry by cytogenetic service laboratories. ISO 19238:2014 addresses a) the confidentiality of personal information, for the customer and the service laboratory, b) the...
International Organization for Standardization – 2017.- 26 p. This document applies to liquid scintillation counters and requires the preparation of a scintillation source obtained by mixing the test sample and a scintillation cocktail. The test sample can be liquid (aqueous or organic), or solid (particles or filter or planchet). This document describes the conditions for...
This document outlines the concepts and principles for information management at a stage of maturity described as "building information modeling (BIM) according to the ISO 19650 series". This document provides recommendations for a framework to manage information including exchanging, recording, versioning and organizing for all actors. This document is applicable to the whole...
This document specifies requirements for information management, in the form of a management process, within the context of the delivery phase of assets and the exchanges of information within it, using building information modeling. This document can be applied to all types of assets and by all types and sizes of organizations, regardless of the chosen procurement strategy....
First edition (15.03.2013) with correction (01.06.2013). ISO 20471 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing. — 30 p. This International Standard specifies requirements for high visibility clothing which is capable of visually signalling the user’s presence. The high visibility...
International Organization for Standardization – 2006.- 30 p. This International Standard specifies the minimum requirements for the design of professional programmes to monitor workers exposed to the risk of internal contamination by radioactive substances and establishes principles for the development of compatible goals and requirements for monitoring programmes. This...
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that...
The International Organization for Standardization (ISO), 2008. This International Standard specifies requirements for electroplated coatings of zinc with supplementary treatments on iron or steel. It includes information to be supplied by the purchaser to the electroplater, and the requirements for heat treatment before and after electroplating. It is not applicable to zinc...
Wrought aluminum and aluminum alloys - Chemical composition and forms of products. Part 1: Chemical composition. This part of ISO 209 specifies the chemical composition of wrought aluminum and aluminum alloys.
International Organization for Standardization – 2008.- 28 p. ISO 21243:08 Radiation protection - Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies - General principles and application to dicentric assay ISO 21243:2008 is to give an overview of the minimum requirements of process and...
The International Organization for Standardization (ISO). First edition, 2004-03-01. 12 p. This International Standard specifies the characteristics of hexagon socket head cap screws with metric fine pitch thread with nominal thread diameters, , from up to and product grade A.
Issued - 2011 Language - English Volume - 62 p. Scope - This part of ISO 21809 specifies requirements of plant-applied external three-layer polyethylene- and polypropylene-based coatings for corrosion protection of welded and seamless steel pipes for pipeline transportation systems in the petroleum and natural gas industries in accordance with ISO 13623.
Vernier, Switzerland: ISO copyright office, 2021. — 22 p. This document is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO 14638). It influences chain links A, B, and C of the chain of standards on size, distance, form, orientation, and location.
International Organization for Standardization – 2004.- 42 p. ISO 22188:2004 specifies methods and means of monitoring for inadvertent movement and illicit trafficking of radioactive material. It provides guidelines on the use of both stationary and portable (e.g. hand-held) instruments to monitor for radiation signatures from radioactive material. Emphasis is placed on the...
International Organization for Standardization. — Second edition. — 2011. — 28 p. Standard specifies minimum requirements for effective incident response and provides the basics for command and control, operational information, coordination and cooperation within an incident response organization. It includes command and control organizational structures and procedures,...
Second edition. ISO 22762-3 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 4, Products (other than hoses). This second edition cancels and replaces the first edition (ISO 22762-3:2005), which has been technically revised. It also incorporates the Technical Corrigendum ISO 22762-3:2005/Cor.1:2006. — 68 p. This part of ISO 22762...
First edition. ISO 22768 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis. — 10 p. This International Standard specifies a method using a differential scanning calorimeter to determine the glass transition temperature of raw rubber.
This International Standard specifies how to characterize embedded indications by classifying them as planar or non-planar. This procedure is also suitable for indications that break the surface after removal of the weld reinforcement.
International Organization for Standardization, Geneva; 2006 This part of ISO 23611 has been drawn up since there is a growing need for the standardisation of terrestrial zoological field methods. Such methods, mainly covering the sampling, extraction and handling of soil invertebrates, are necessary for the following purposes: ⎯ biological classification of soils including...
International Organization for Standardization, Geneva; 2007 This part of ISO 23611 has been drawn up since there is a growing need for the standardization of terrestrial zoological field methods. Such methods, mainly covering the sampling, extraction and handling of soil invertebrates, are needed for the following purposes: ⎯ biological classification of soils including soil...
Third edition. International Standard ISO 2411 was prepared by the European Committee for Standardization (CEN) in collaboration with ISO Technical Committee TC 45, Rubber and rubber products, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This third edition cancels and replaces the second edition (ISO 2411:1991), which has...
This International Standard provides a basis for specifications which is applicable only to textile glass mats that are made from chopped or continuous strands bonded together by chemical or mechanical means and that are used for the reinforcement of plastics. It is not applicable to surfacing mats, staple-fibre mats or glass mats (or bats) of the type used for thermal and...
Standard Number BS ISO 2575:2010 Title Road vehicles - Symbols for controls, indicators and tell-tales Status Current, Under review Publication Date 31 July 2010 Cross References ISO 15008, IEC 60417, ISO 3864-1, ISO 7001, ISO 7010, IEC 80416-3, ISO 7000, IEC 80416-1, ISO 80416-2, ISO 80416-4, ISO 3864-4 International Relationships ISO 2575:2010/Amd.7:2017 Amended By Amendment,...
Second edition. — International Organization for Standardization. — 1980. — 8 p. Concerns the estimation of the mean of a normal population on the basis of a series of tests applied to a random sample of individuals drawn from this population when the variance of the population is unknown and calculation of the confidence interval for the population mean therefrom and from the...
International Organization for Standardization – 2011.- 206 p. ISO 27048:2011 specifies the minimum requirements for the evaluation of data from the monitoring of workers occupationally exposed to the risk of internal contamination by radioactive substances. It presents procedures and assumptions for the standardised interpretation of monitoring data, in order to achieve...
International Organization for Standardization – 2010.- 52 p. ISO 28218:2010 provides criteria for quality assurance and control, and evaluation of performance of radiobioassay service laboratories. Criteria and guidance for in vivo radiobioassay and in vitro radiobioassay are given in separate clauses. The following are within the scope of ISO 28218:2010: • the accuracy of -...
ISO 2846-1:2006 specifies the colour and transparency characteristics that have to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a laboratory printability tester), the defined substrate and a method for testing to ensure conformance are also defined....
International Organization for Standardization. — 1976. — 50 p. This standard was last reviewed and confirmed in 2006. Therefore this version remains current. This standard specifies the techniques required to estimate the mean or the variance of populations and to examine certain hypotheses concerning the value of those parameters, from samples. The techniques used are valid...
International Organization for Standardization. — 2010. — 110 p. Standard sets forth performance-based criteria and recommendations for the design and use of systems for sampling of airborne radioactive materials in the effluent air from the ducts and stacks of nuclear facilities. The requirements and recommendations of ISO 2889:2010 are aimed at sampling that is conducted for...
Second edition. The committee responsible for this document is ISO/TC45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis. This second edition cancels and replaces the first edition (ISO 289-3:1999), which has been technically revised to update normative references and to provide a reference to the latest calibration information. — 10 p. This part of ISO 289...
International Organization for Standardization. — 2012. — 26 p. ISO 2919:2012 establishes a classification system for sealed radioactive sources that is based on test performance and specifies general requirements, performance tests, production tests, marking and certification. It provides a set of tests by which manufacturers of sealed radioactive sources can evaluate the...
The International Organization for Standardization (ISO). Second edition , 1983-05-15. 8 p. This International Standard specifies two sets of representations, for SI units and other internationally recognized units defined in ISO 1000 along with their decimal multiples and sub-multiples formed by the use of prefixes, for use in data interchange by Systems with limited graphic...
International Organization for Standardization – 2012, 2015.- 41 p. ISO 29661:2012 defines terms and fundamental concepts for the calibration of dosemeters and equipment used for the radiation protection dosimetry of external radiation -- in particular, for beta, neutron and photon radiation. It defines the measurement quantities for radiation protection dosemeters and doserate...
International Organization for Standardization. — 2009. — Austrian Standards Institute. — 2010. — 38 p. Standard provides principles and generic guidelines on risk management. Standard can be used by any public, private or community enterprise, association, group or individual. Therefore, standard is not specific to any industry or sector. Standard can be applied throughout the...
This ISO document is a Draft International Standard. Voting terminates on 2011-05-16. 199 p. This International Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.
The International Organization for Standardization (ISO). Second edition. 2002-12-15. This second edition cancels and replaces the first edition (ISO 3376:1976), which has been technically revised. The Common Market for Eastern and Southern Africa (COMESA) standard DHS 234: 2005 is technically identical to ISO 3376::2002. 12 p. This International Standard specifies a method for...
Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear 1 Scope This part of ISO 3377 specifies a method for determining the tear strength of leather using a double edged tear. The method is sometimes described as the Baumann tear. It is applicable to all types of leather.
ISO 37001:2016 specifies requirements and provides guidance for establishing, implementing, maintaining, reviewing and improving an anti-bribery management system. The system can be stand-alone or can be integrated into an overall management system. ISO 37001:2016 addresses the following in relation to the organization's activities: - bribery in the public, private and...
Status: Withdrawn Publication date : 2014-05. ISO 37120:2014 defines and establishes methodologies for a set of indicators to steer and measure the performance of city services and quality of life. It follows the principles set out and can be used in conjunction with ISO 37101:?, Sustainable development in communities ? Management systems ? General principles and requirements,...
ISO 39001:2012 specifies requirements for a road traffic safety (RTS) management system to enable an organization that interacts with the road traffic system to reduce death and serious injuries related to road traffic crashes which it can influence. The requirements in ISO 39001:2012 include development and implementation of an appropriate RTS policy, development of RTS...
International Organization for Standardization. — 2014. — 8 p. ISO 3925:2014 establishes the requirements for the identification and documentation of unsealed radioactive substances issued commercially by suppliers and which are intended for further handling or processing, either physical or chemical. Requirements for radiopharmaceuticals and standard sources are not covered....
ISO 41001:2018 specifies the requirements for a facility management (FM) system when an organization: a) needs to demonstrate effective and efficient delivery of FM that supports the objectives of the demand organization; b) aims to consistently meet the needs of interested parties and applicable requirements; c) aims to be sustainable in a globally-competitive environment. The...
Specifies a method of determining the liquid flow-rate by measuring the mass of liquid delivered into a weighing tank in a known time intervall. Deals in particular with the measuring apparatus, the procedure, the method for calculating the flow-rate and the uncertainties associated with the measurement. Does not cover the cases of corrosive or toxic liquids.
This International Standard specifies a titrimetric method for the determination of the potassium content of fertilizers. Preparation of a test Solution as specified in ISO 5317 or ISO 7407. Precipitation of potassium ions present in an aliquot Portion of the test Solution (previously treated with bromine water and activated charcoal if cyanamide and/or organic materials are...
This International Standard specifies a titrimetric method, after distillation, for the determination of the total nitrogen content of fertilizers in all forms, including those which have to be digested. The method is not recommended for fertilizers containing more than 7 % of organic matter. Reduction of nitrate to ammonia by chromium powder in acid medium. Conversion of...
ISO 55000:2014 provides an overview of asset management, its principles and terminology, and the expected benefits from adopting asset management. ISO 55000:2014 can be applied to all types of assets and by all types and sizes of organizations. General information Status: Published Publication date : 2014-01 Corrected version (en) : 2014-03 Corrected version (fr) : 2014-07...
ISO 55001:2014 specifies requirements for an asset management system within the context of the organization. ISO 55001:2014 can be applied to all types of assets and by all types and sizes of organizations. General information Status: Published Publication date : 2014-01 Corrected version (fr) : 2014-07 Edition: 1 Number of pages : 14 Technical Committee : ISO/TC 251 Asset...
ISO 55002:2014 provides guidance for the application of an asset management system, in accordance with the requirements of ISO 55001. ISO 55002:2014 can be applied to all types of assets and by all types and sizes of organizations. General information Status: Withdrawn Publication date : 2014-01 Corrected version (en) : 2014-03 Corrected version (fr) : 2014-07 Edition: 1...
This International Standart specifies the main manufacturing dimensions of welded bulkhead pieces with flanges used in shipbuiding. First edition: 1978-07-01. 4 p.
Fourth edition. SC 3, Raw materials (including latex) for use in the rubber industry. This fourth edition cancels and replaces the third edition (ISO 5794-1:2005), of which it constitutes a minor revision. — 36 p. This part of ISO 5794 specifies methods of test for characterizing precipitated hydrated silica for use as a rubber compounding ingredient. A definition of...
ISO 6270-2:2005 describes the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different laboratories are reproducible. It does not cover the shape and preparation of the test...
Fourth edition. This standard was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 12, Passive safety crash protection systems. This fourth edition cancels and replaces the third edition (ISO 6487:2000), which has been technically revised. — 18 p. This International Standard gives requirements and recommendations for measurement techniques involving the...
Fourth edition. The committee responsible for this document is ISO/TC45, Rubber and rubber products, Subcommittee SC 2, Testing and analysis. This fourth edition cancels and replaces the third edition (ISO 6502:1999), of which it constitutes a minor revision. The references have been updated. — 28 p. This International Standard provides guidance on the determination of...
ISO 6507-1:1997(E). International standard. Second edition. 1997-11-15. Was prepared by Technical Committee ISO/TC 164. This second edition of ISO 6507-1 cancels and replaces ISO 6507-1:1982, ISO 6507-2:1983, ISO 6507-3:1989, ISO 409-1:1982, ISO 409-2:1983 and ISO/DIS 409-3:1992. - 112 p.
First edition. International Standard ISO 6916-1 was prepared by Technical Committee ISO/TC, Rubber and rubber products. — 19 p. This part of ISO 6916 classifies flexible cllular rubber products known as sponge and expanded rubber. The base material used in their manufacture may be natural rubber, reclaimed rubber or synthetic rubber, either alone or in combination. The only...
International Organization for Standardization – 2006.- 18 p. ISO 6980-1:2006 specifies the requirements for reference beta radiation fields produced by radionuclide sources to be used for the calibration of personal and area dosimeters and dose-rate meters to be used for the determination of the quantities Hp(0,07) and H'(0,07), and for the determination of their response as a...
International Organization for Standardization – 2004.- 41 p. ISO 6980-2:2004 specifies methods for the measurement of the directional absorbed-dose rate in a tissue-equivalent slab phantom in the ISO 6980 reference beta-particle radiation fields. The energy range of the beta-particle-emitting isotopes covered by these reference radiations is 0,066 to 3,54 MeV (maximum energy)....
International Organization for Standardization – 2006.- 29 p. ISO 6980-3:2006 describes procedures for calibrating and determining the response of dosemeters and doserate meters in terms of the International Commission on Radiation Units and Measurements (ICRU) operational quantities, that is, the directional dose equivalent and the personal dose equivalent, for radiation...
International Organization for Standardization. — 2016. — 34 p. ISO 7503 (all parts) and ISO 8769 are addressed to the people responsible for determining the radioactivity present on solid surfaces. ISO 7503 is published in three parts and can be used jointly or separately according to needs. ISO 7503-1:2016 relates to the assessment of surface contamination by direct and...
International Organization for Standardization. — 2016. — 18 p. ISO 7503 (all parts) and ISO 8769 are addressed to the people responsible for measuring the radioactivity present on solid surfaces. ISO 7503-2:2016 applies to the evaluation of contamination on surfaces in terms of activity per unit area by an indirect method of measurement. ISO 7503-2:2016 is applicable to...
International Organization for Standardization. — 2016. — 70 p. ISO 7503 and ISO 8769 are addressed to the people responsible for determining the radioactivity present on solid surfaces. ISO 7503-3:2016 applies to the evaluation of contamination on surfaces in terms of activity per unit area by direct and indirect methods of measurement and deals with the complex aspects of...
This International Standard specifies a general method known as the Karl Fischer method, suitable for the determination of free water or water of crystallization in most solid or liquid chemical products, both organic and inorganic
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that...
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that...
Second edition. The committee responsible for this document is ISO/TC45, Rubber and rubber products, SC 2, Testing and analysis. This second edition cancels and replaces the first edition (ISO 815-2:2008), which has been technically revised, mainly by addition of method 1 and a calibration schedule (Annex A). — 24 p. This part of ISO 815 specifies two methods for the...
International Organization for Standardization – 2000.- 37 p. This part of ISO 8529 takes as its starting point the neutron sources described in ISO 8529-1. It specifies the procedures to be used for realizing the calibration conditions of radiation protection devices in neutron fields produced by these calibration sources, with particular emphasis on the corrections for...
International Organization for Standardization – 2016.- 20 p. ISO 8769:2016 specifies the characteristics of reference sources of radioactive surface contamination, traceable to national measurement standards, for the calibration of surface contamination monitors. This International Standard relates to alpha-emitters, beta-emitters, and photon emitters of maximum photon energy...
Publisher: ISO copyright office Ch. de Blandonnet 8 CP 401 Published in Switzerland Publish Date: 2015-09-15 Pages: 57 Language: English Reference Number: ISO 9000:2015(E) ICS: 03.120.10; 01.040.03 TC/SC: ISO/TC 176/SC 2 Stage: goup A (2015-09-22) The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives,...
CRC Press; 1 edition (February 7, 2017) — 442 p. ISBN10: 1498733212 ISBN13: 978-1498733212 This book covers all of the new ISO 9001 requirements in detail, including examples and demonstrations from various fields and industries. In the practice of industry, the changes will demand from the ISO 9001 standard certified organizations to initiate massive adjustments to their...
Publisher: ISO copyright office Ch. de Blandonnet 8 CP 401 Published in Switzerland Publish Date: 2015-09-15 Pages: 40 Language: English Reference Number: ISO 9001:2015(E) ICS: 03.120.10 TC/SC: ISO/TC 176/SC 2 Stage: 60.60 (2015-09-22) The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In...
Publisher: ISO Publish Date: 2015 Pages: 40 Language: English Reference Number: ISO 9001:2015(E) ICS: 03.120.10 TC/SC: ISO/TC 176/SC 2 Stage: 60.60 (2015-09-22) Abstract ISO 9001:2015 specifies requirements for a quality management system when an organization: a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable...
Publisher: ISO copyright office Ch. de Blandonnet 8 CP 401 Published in Switzerland Publish Date: 2018-08-15 Pages: 59 Language: English Reference Number: ISO 9004:2018(E) ICS: 03.120.10; 03.100.70 TC/SC: ISO/TC 176/SC 2 This document provides guidance for organizations to achieve sustained success in a complex, demanding and ever-changing environment, with reference to the...
States a general method for determining the resistance to abrasive wear of plastics under the action of abrasive wheels. Equally applicable to moulded test specimens, components and finished products. This method is not applicable to cellular materials or paints.
Second edition 2013-09-01 This part of ISO 9692 specifies types of joint preparation for manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding, and beam welding of steel. It applies to joint preparation for full penetration butt welds and for fillet welds. For partial penetration butt welds, types of joint preparation and dimensions differing from...
The International Organization for Standardization (ISO). First edition. 1999-06-01. 44 p. This part of ISO 9809 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 I up to and including 150 I for...
The International Organization for Standardization (ISO). First edition. 2000-06-15. 52 p. This part of ISO 9809 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, and tests at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 I up to and including 150 I for...
This International Standard is the third of a set dealing with technical specifications of centrifugal pumps; they are designated as Classes I, II and III. Class I (see IS0 9905) comprises the most severe and Class III (this International Standard) the least severe requirements. For requirements for Class II centrifugal pumps, see IS0 5199. 27 p.
International Organization for Standardization. — 1992. — 16 p. Standard gives terms and definitions and test methods by radioactive means and non-radioactive means. Tabulates threshold detection values and limiting values for different test methods. This standard was last reviewed and confirmed in 2014. Therefore this version remains current. ICS:13.280 - Radiation protection
March 27, 2000 ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on...
Fifth edition 2018-02. ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal...
ISO/TS 29001 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, and approved for publication as an ISO/TS by ISO/TC 67 to provide additional requirements to ISO 9001:2000 specifically intended for the petroleum, petrochemical and natural gas industries.
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 85. 18 p. The international standard ISO/ASTM 52116 was part of the Pilot Project between ISO and ASTM International to develop and maintain a group of ISO/ASTM dosimetry standards for radiation processing. This practice outlines dosimetric procedures to be...
The International Organization for Standardization (ISO). This ISO document is a working draft. ISO/TC 67/SC4. Date: 2010-11-8. 49 p. This International Standard provides requirements and guidelines for completion accessories, as defined herein for use in the petroleum and natural gas industry. This International Standard provides requirements for the functional specification,...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 86/SC 1. Date: 2006-04-03. This second edition cancels and replaces the first edition (ISO 5149:1993), which has been technically revised. 61 p. This standard specifies the requirements for the safety of persons and property, provides guidance for the protection...
The International Organization for Standardization (ISO). This ISO document is a working draft. ISO/TC 213 N160. Date: 1997-09-19. 25 p. This part of ISO 8062 specifies a system of dimensional and geometrical tolerances as well as required machining allowance grades for castings as delivered to the purchaser. It is applicable to the dimensional and geometrical accuracy of...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67/SC 3. Voting begins on: 2010-03-18. Voting terminates on: 2010-07-18. 112 p. This part of ISO 10426 specifies methods and gives recommendations for the testing of cement slurries and related materials under simulated well
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 118/SC 1. Voting begins on: 2010-10-07. Voting terminates on: 2011-03-07. This second edition cancels and replaces the first edition (ISO 10439:2002), which has been technically revised and split into four (4) parts. 149 p. This International Standard specifies...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 118/SC 1. Voting begins on: 2010-10-07. Voting terminates on: 2011-03-07. This second edition cancels and replaces the first edition (ISO 10439:2002), which has been technically revised and split into four (4) parts. 67 p. This International standard specifies...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 118/SC 1.Voting begins on: 2010-10-07.Voting terminates on: 2011-03-07. This second edition cancels and replaces the first edition (ISO 10439:2002), which has been technically revised and split into four (4) parts. 102 p. This International Standard specifies...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 118/SC 1. Voting begins on: 2010-10-07. Voting terminates on: 2011-03-07. This second edition cancels and replaces the first edition (ISO 10439:2002), which has been technically revised and split into four (4) parts. 167 p. This International Standard specifies...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 153/SC 1. Voting begins on: 2011-12-21, Voting terminates on: 2012-05-21. This second edition cancels and replaces the first edition (ISO 10631:1994), which has been technically revised. 20 p. This international standard specifies requirements for the design,...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO TC23/SC 17. Date: 2009-07-14. This second edition cancels and replaces the first edition (ISO 11680-1:2000), which has been technically revised to reflect the state of the art. 25 p. This part of ISO 11680 specifies safety requirements and their verification for...
The International Organization for Standardization (ISO). Voting begins on 2011-10-13. Voting terminates on 2012-03-13. 47 p. This draft has been developed within the International Organization for Standardization (ISO), and processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement. The part of International Standard ISO 13628 has been prepared to...
68 p. This part of ISO 13628 addresses specific requirements and recommendations for subsea structures and manifolds, within the frameworks set forth by recognized and accepted industry specifications and standards. As such, it does not supersede or eliminate any requirement imposed by any other industry specification. This part of ISO 13628 covers subsea manifolds and...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 115/SC 3. Voting begins on: 2010-11-11. Voting terminates on: 2011-04-11. Revision of first edition (ISO 13710:2004). 91 p. This International Standard specifies requirements for reciprocating positive-displacement pumps and pump units for use in the petroleum,...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67/SC 4. Voting begins on: 2011-07-04. Voting terminates on: 2011-12-14. 52 p. This International Standard provides requirements and guidelines for completion accessories, as defined herein for use in the petroleum and natural gas industry. This International...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO TC46/SC4/WG8. 9 p. The purpose of this International Standard is to define and promote the use of a set of standard identifiers for the unique identification of libraries and related organisations with a minimum impact on already existing systems.
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 104. Voting begins on: 2006-12-01, Voting terminates on: 2007-06-01. This second edition cancels and replaces the first edition (ISO/PAS 17712:2003), which has been technically revised. 21 p. This International Standard establishes uniform procedures for the...
This document outlines the concepts and principles for information management at a stage of maturity described as "building information modeling (BIM) according to the ISO 19650 series". This document provides recommendations for a framework to manage information including exchanging, recording, versioning and organizing for all actors. This document is applicable to the whole...
This document specifies requirements for information management, in the form of a management process, within the context of the delivery phase of assets and the exchanges of information within it, using building information modeling. This document can be applied to all types of assets and by all types and sizes of organizations, regardless of the chosen procurement strategy....
ISO, 2019. — 89 p. Scope Normative references Symbols and abbreviated terms Objectives, planning, and quality management Positioning Seafloor mapping Sub‐seafloor mapping Reporting of seafloor mapping and sub‐seafloor mapping Integration, interpretation and investigation of geohazards Annex A (informative) Additional information and guidance
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 115/SC 3. Voting begins on: 2010-03-25. Voting terminates on: 2010-08-25. This second edition cancels and replaces the first edition (ISO 21049:2004), which has been technically revised. 290 p. This International Standard specifies requirements and gives...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67SC 2. Voting begins on: 2006-09-21. Voting terminates on: 2007-02-21. 50 p. This part of ISO 21809 specifies requirements of plant applied external three layer extruded polyethylene and polypropylene based coatings for corrosion protection of welded and...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67/SC 6. Date: 2011-03-14. 259 p. This International Standard is applicable to pressure-relieving and vapour-depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, liquefied...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67/SC 6. Date: 2011-03-14. 259 p. This International Standard is applicable to pressure-relieving and vapour-depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, liquefied...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 22/SC 7. Voting begins on: 2007-12-20, Voting terminates on: 2008-05-20. 20 p. This part of ISO 4254, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of self-propelled and...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 23/SC 15. Voting begins on: 2011-07-28, Voting terminates on: 2011-09-28. This third edition cancels and replaces the second edition (ISO 11850:2003), which has been technically revised. 26 p. This International Standard specifies general safety...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 67/SC 4. Voting begins on: 2010-09-16, Voting terminates on: 2010-11-16. This second edition cancels and replaces the first edition (ISO 13628-4:1999), which has been technically revised. 260 p. This part of ISO 13628 provides specifications for subsea...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 108/SC 5. Date: 2002-05-15. 22 p. This part of ISO 18436 specifies the general requirements for vibration analysis personnel who perform machinery condition monitoring and diagnostics of machines. Certification to this standard will provide recognition of...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 2/SC 10. Voting begins on: 2011-01-27, Voting terminates on: 2011-03-27.14 p. This International Standard specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2,2 to ST9,5 inclusive according to ISO 1478,...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC23/SC 6. Date: 2008-06-25. 31 p. This part of ISO 4254, to be used together with ISO 4254-1:2008, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed and self-propelled agricultural...
The International Organization for Standardization (ISO). This ISO document is a Final Draft International Standard. ISO/TC 242. Date: 2011-01-12. 31 p. This International Standard specifies requirements for an organization to establish, implement, maintain and improve an energy management system, which enables an organization to take a systematic approach, in order to achieve...
Reference number ISO/IEC 12207:2008(E). Second edition 2008-02-01. ICS 35.080. Language: English. 122 p. This International Standard establishes a common framework for software life cycle processes, with well-defined terminology, that can be referenced by the software industry. It applies to the acquisition of systems and software products and services, to the supply,...
International StandardISO/IEC 17025:2017, General requirements for the competence of testing and calibration laboratories , 2017. - 38 p ISO/IEC 17025:2017 specifies the general requirements for the competence, impartiality and consistent operation of laboratories. ISO/IEC 17025:2017 is applicable to all organizations performing laboratory activities, regardless of the number...
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields...
The International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Fifth edition, 2004. 68 p. This part of the ISO/IEC Directives specifies rules for the structure and drafting of documents intended to become International Standards, Technical Specifications or Publicly Available Specifications. As far as practicable, these rules also...
The International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Edition 6.0, 2011-04. 76 p. This part of the ISO/IEC Directives specifies rules for the structure and drafting of documents intended to become International Standards, Technical Specifications or Publicly Available Specifications. As far as practicable, these rules also...
Publication date : 2011-12 Edition: 1 Number of pages : 37 Technical Committee : ISO/IEC JTC 1/SC 7 Software and systems engineering ISO/IEC/IEEE 42010:2011 addresses the creation, analysis and sustainment of architectures of systems through the use of architecture descriptions. A conceptual model of architecture description is established. The required contents of an...
International Organization for Standardization (ISO), Geneva, Switzerland, 2 edition, 2007, 32 p. ISO/TR 15377 was prepared by Technical Committee ISO/TC 30, Measurement of fluid flow in closed conduits, Subcommittee SC 2, Pressure differential devices. This second edition cancels and replaces the first edition (ISO/TR 15377:1998), which has been technically revised. It...
ISO/TR 25901-1:2016 contains general terms and definitions applicable to welding and allied processes. It does not contain terms and definitions related to specific processes or particular aspects of welding and allied processes that are covered in other parts of this Technical Report (see Foreword) or in other ISO standards. In the main body of this part of ISO/TR 25901, terms...
ISO/TR 945-2:2011 deals with the two-dimensional characterization of graphite form and size in cast irons. A standard method for determining graphite form by image analysis had not been developed at the time of this report, but several methods are in use in the industry. The purpose of ISO/TR 945-2 is to give an illustration of what is possible and to suggest ways in which the...
The International Organization for Standardization (ISO). This ISO document is a working draft. ISO/TC 67/SC 4 N. Date: 2011-11-21. 374 p. This part of ISO 13628 gives requirements and recommendations for the design, analysis, materials, fabrication, testing and operation of riser well intervention systems run from a floating vessel. It is applicable to all new riser well...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 67/SC 4 N. Date: 2010-09-30. 88 p. This part of ISO 13628 provides recommendations for development and design of remotely operated subsea tools and interfaces on subsea production systems in order to maximise the potential of standardizing equipment and design...
The International Organization for Standardization (ISO). This document is the second working draft including the technical, terminological and editorial comments on the first working draft. ISO/TC85/WG 1. Date: 2011-08-20. 39 p. This International Standard lists unambiguous terms and definitions related to radiation protection concepts in the subject field of nuclear energy....
International Organization for Standardization, Geneva; 2005 This part of ISO 10381 is one of a group of standards dealing with various aspects of site investigation and sampling. It should be used in conjunction with the other parts of ISO 10381 (see Foreword). Whilst serious cases of soil contamination mostly occur at urban and industrial sites, serious contamination of...
International Organization for Standardization, Geneva; 2005 ISO 10381-7 is one of a group of International Standards to be used in conjunction with each other where necessary. ISO 10381 (all parts) deals with sampling procedures for the various purposes of soil investigation. The stated soil-gas and landfill-gas measurements do not give any quantitative statement of the total...
International Standard Organization (ISO), 1998. 14p, 3651-2 This part of ISO 3651 specifies methods for the determination of the resistance to intergranular corrosion of ferritic, austenitic and ferritic-austenitic (duplex) stainless steels in media containing sulfuric acid. It also specifies the purposes which may be assigned to the test. The test methods included are:method...
Regensburg, Hansen, 2012. - 312 p. Wenn wir die Teile selbst herstellen, passen sie; lassen wir sie nach denselben Zeichnungen auswärts fertigen, passen sie nicht." Kennen Sie das? Eine technische Zeichnung muss ein Werkstück vollständig und eindeutig beschreiben. Die meisten Zeichnungen in der Praxis tun das jedoch wegen fehlender oder unzureichender Form- und Lagetolerierung...
The International Organization for Standardization (ISO). The International Standard ISO 10001:2007 has the status of a Malaysian Standard. 2007 p. This International Standard provides guidance for planning, designing, developing, implementing maintaining and improving customer satisfaction codes of conduct. This International Standard is applicable to product-related codes...
Organisation internationale de normalisation (L'ISO). La présente Norme européenne a été adoptée par le CEN le 28 octobre 2005. Version française. 27 p. La présente Norme internationale fournit des niveaux de qualité par rapport aux défauts dans les assemblages en aluminium et alliages d'aluminium soudés à l'arc. Elle s'applique à des épaisseurs de matériau supérieures à 0,5...
La norme internationale (ISO). 2004. 13 p. Version française. Elle reproduit intégralement la norme internationale ISO 15609-1:2004. La présente norme spécifie les exigences relatives au contenu des descriptifs de modes opératoires de soudage pour les procédés de soudage à l'arc. La présente norme fait partie d'une série de normes, les détails de cette série sont donnés à...
The International Organization for Standardization (ISO). This document supersedes EN 12534:1999. The text of ISO 16834:2006 has been approved by CEN as a EN ISO 16834:2007 without any modification. 21 p. This International Standard specifies requirements for classification of wire electrodes, wires, rods and weld deposits in the as-welded condition and in the post-weld...
Cette norme européenne a été reprise par la CEN/TC 262 « Protection des matériaux métallique contre la corrosion » des travaux de l’ISO/TC 156 « Corrosion des métaux et alliages » de l’Organisation Internationale de Normalisation (ISO). La présente partie de l’ISO 7539 donne des directives générales quant au choix de l’utilisation et à l’interprétation de diverses méthodes...
ISO 50002:2014 specifies the process requirements for carrying out an energy audit in relation to energy performance. It is applicable to all types of establishments and organizations, and all forms of energy and energy use. ISO 50002:2014 specifies the principles of carrying out energy audits, requirements for the common processes during energy audits, and deliverables for...
The International Organization for Standardization (ISO). This ISO document is a Draft International Standard. ISO/TC 58/SC 3. Voting begins on: 2007-09-13. Voting terminates on: 2007-11-13. The text of ISO/DIS 7866:2007 has been approved by CEN as a prEN ISO 7866:2007 without any modification. 74 p. This International Standard specifies minimum requirements for the material,...
The International Organization for Standardization (ISO). Second edition, 2004-07-15. This second edition cancels and replaces the first edition (ISO 10434:1998), which has been technically revised. 40 p. This International Standard specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where...
The International Organization for Standardization (ISO). Second edition, 2004-08-15. This second edition cancels and replaces the first edition (ISO 10497:1992), which has been technically revised. This International Standard specifies fire type-testing requirements and a fire type-test method for confirming the pressure-containing capability of a valve under pressure during...
ISO/TC 193, Natural gas, was established in May 1989, with the task of creating new standards, and updating existing standards relevant to natural gas. This includes gas analysis, direct measurement of properties, quality designation and traceability. This document provides a reliable mathematical relationship between water content and water dew point in natural gas. The...
Comments