Independently published, 2024. — 343 p. Embedded Systems For Engineers and Students is a comprehensive textbook written to provide an in-depth understanding of the principles and practical applications of embedded systems. The book begins with an introduction to the basics of embedded systems, including the hardware and software components, design methodologies, and programming...
New York: Altera Corporation, 2011. — 27 p. This tutorial presents an introduction to Altera’s Nios II processor, which is a soft processor that can be instantiated on an Altera FPGA device. It describes the basic architecture of Nios II and its instruction set. The Nios II processor and its associated memory and peripheral components are easily instantiated by using Altera’s...
New York: Altera Corporation, 2011. — 44 p. This document describes a computer system that can be implemented on the Altera DE2 development and education board. This system, called the DE2 Media Computer, is intended to be used for experiments in computer organization and embedded systems. To support these experiments, the system contains a processor, memory, video devices, and...
Independently published, 2017. — 156 p. The PICAXE microcontroller is an inexpensive tiny computer sitting in a microchip. It can be programmed by you to control gadgets, your inventions or your creations and the list of these are endless. Your ideas or imagination is your only limiting factor. Alarm systems, keypad entry systems, electronic dice, games and colour sensors are...
McGraw-Hill/TAB Electronics, 2010. — 494 p. — ISBN: 978-0071664509. Authors: Shane Avery, Chip Gracey, Vern Graner, Martin Hebel, Joshua Hintze, Andre LaMothe, Andy Lindsay, Jeff Martin and Hanno Sander. The Only Official Guide to the Parallax Multicore Propeller Microcontroller Written by a team of Propeller experts, this authoritative guide shows you how to realize your...
Lakeview Research LLC, 1997. — 289 p. — ISBN: 0-9650819-4-X. This book is a hands-on guide to designing, building, and testing microcontroller-based devices. Microcontrollers, or single-chip computers, are ideal for projects that require computer intelligence, but don’t need the overhead of a complete personal computer with disk drives, keyboard, and full-screen display. The...
Newnes, 2004. — 334 p. — ISBN: 0-7506-7723-6. (Embedded technology series). There often seems to be a division between the analog and digital worlds. Digital designers usually do not like to delve into analog, and analog designers tend to avoid the digital realm. The two groups often do not even use the same buzzwords. Even though microprocessors have become increasingly faster...
Newnes, 2001. - 288 p. Provides hard-to-find information on interfacing analog devices and technologies to the purely digital world of embedded microprocessors. Gives the reader the insight and perspective of a real embedded systems design engineer, including tips that only a hands-on professional would know. Covers important considerations for both hardware and software...
3rd Edition. — Newnes, 2002. — 362 p. — ISBN: 0-7506-75349. The less-experienced engineer will be able to apply Ball's advice to everyday projects and challenges immediately with amazing results. In this new edition, the author has expanded the section on debug to include avoiding common hardware, software and interrupt problems. Other new features include an expanded section...
Morgan & Claypool Publishers, 2006 - 115 p. - Microcontrollers Fundamentals for Engineers and Scientists provides practicing scientists and engineers a tutorial on the fundamental concepts and the use of microcontrollers. Today, microcontrollers, or single integrated circuit (chip) computers, play critical roles in almost all instrumentation and control systems. There are a...
Apress, 2018. — 308 p. Gain the knowledge and skills necessary to improve your embedded software and benefit from author Jacob Beningo’s more than 15 years developing reusable and portable software for resource-constrained microcontroller-based systems. You will explore APIs, HALs, and driver development among other topics to acquire a solid foundation for improving your own...
Independently published, 2022. — 156 S. Dieses Buch soll keine Ansammlung von Programmierbeispielen zur Lösung aller möglichen und unmöglichen Probleme sein. Das Ziel ist mehr die Heranführung an die Lösung von eigenen Projekten. Dazu werden zuerst die grundlegenden Gesetze der Elektrotechnik, die man zum Aufbau von Schaltungen mit Mikrocontrollern unbedingt wissen muss,...
New York: Morgan & Claypool, 2017. — 193 p. Microcontroller education has experienced tremendous change in recent years. This book attempts to keep pace with the most recent technology while holding an opposing attitude to the No Need to Reinvent the Wheel philosophy. The choice strategies are in agreement with the employment of today's flexible and low-cost Do-It-Yourself...
Wiley, 2021. — 355 p. — ISBN: 978-1119782612. Discover a complete treatment of microcomputer programming and application development with Arduino and 3D printers Microcontroller Prototypes with Arduino and a 3D Printer: Learn, Program, Manufacture delivers a comprehensive guide to learning microcontrollers that’s perfectly suited to educators, researchers, and manufacturers....
Edson Borin, 2021. — 151 p. An Introduction to Assembly Programming with RISC-V is a textbook for programmers that want to learn how to program in assembly language. It leverages the RISC-V ISA to guide the reader through the main concepts of assembly programming and the assembly process. The book is divided into three parts: I) Introduction to computer systems and assembly...
O’Reilly, 2002. — 318 p. — ISBN: 0-596-00362-5. Intelligent readers who want to build their own embedded computer systems-- installed in everything from cell phones to cars to handheld organizers to refrigerators-- will find this book to be the most in-depth, practical, and up-to-date guide on the market. Designing Embedded Hardware carefully steers between the practical and...
Packt Publishing, 2013. — 108 p. — ISBN-10: 1849697825. In recent years, electronics have gone from something that only electronic engineers can understand, to a common hobby that is accessible to all. Netduino has grown to be a part of this revolution, providing a development board that is both easy to use, and allows existing .NET developers to build on knowledge they already...
PHI Learning Private Limited, 2023. — 277 p. Embedded system, as a subject, is an amalgamation of different domains, such as digital design, architecture, operating systems, interfaces, and algorithmic optimization techniques. This book acquaints the students with the alternatives and intricacies of embedded system design. It is designed as a textbook for the undergraduate...
McGraw-Hill Education TAB, 2017. — 237 p. — ISBN: 1260010899. Fiendishly Clever Sensor Projects for Your Arduino and Raspberry Pi. Learn to quickly build your own electronic gadgets that monitor, measure, and react to the real world”with no prior experience required! This easy-to-follow guide covers the programming and electronics essentials needed to build fun and educational...
McGraw-Hill, 2003. — 466 p. — ISBN: 0-07-142084-3. This is the official OOPic (object oriented embedded microcontroller) manual endorsed by the largest manufacturer of OOPics and the first to market book on these microcontrollers that are taking the robotics industry by storm. Foreword of this book is written by the President and CEO of Savage Innovations - the manufacturer of...
Apress, 2019. — 327 p. Get started with the ASUS Tinker Board and begin building and expanding your own projects. This book covers the basic operating systems offered by ASUS for the Tinker Board and Tinker Board S, TinkerOS and Android, and then dives deeper into its capabilities for projects; such as a music streamer or a weather display with internet connectivity.
Apress, 2016. — 422 p. — ISBN10: 1484223217. — ISBN13: 978-1484223215. Author provides the first, advanced-level resource on ARTIK for experienced developers. Includes detailed explanations of publicly listed ARTIK API calls Provides a professional-level reference to the Samsung ARTIK API, as well as to other aspects of interest to developers such as the file systems, the...
Leanpub, 2020. — 50 p. Version: 2020-06-17. So you have good information about the new system hardware and requirements. You also have a collection of chip vendor libraries, compiler-supported functions, previous-generation software, and ideas for new code. How do you come up with a software architecture that can tie everything together to meet the system requirements? Embedded...
Leanpub, 2020. — 100 p. This book is a case study of an embedded software project. It describes a project from start to finish, and all of the material and documents developed and used along the way. The information supplied comes directly from the author’s 30 years of experience developing embedded software for electronic products made by top U.S. corporations. This book uses...
Micrium (September 16, 2011) - 524 p. Billions of microcontrollers are sold each year to create embedded systems for a wide range of products. An embedded system is an application-specific computer system which is built into a larger system or device. Using a computer system offers many benefits such as sophisticated control, precise timing, low unit cost, low development cost,...
Cham: Springer, 2021. — 891 p. This textbook introduces readers to mixed-signal, embedded design and provides, in one place, much of the basic information to engage in serious mixed-signal design using Cypress' PSoC. Designing with PSoC technology can be a challenging undertaking, especially for the novice. This book brings together a wealth of information gathered from a large...
Independently published, 2021. — 165 p. — ISBN B08RW4CZ5G. A microcontroller is an electronic device belonging to the microcomputer family. These are fabricated using the VLSI technology on a single chip. There are microcontrollers available in the present market with different word length starting from 4 bit, 8 bit, 64 bit to 128 bit. This chapter is about microcontrollers,...
Gistrup: River Publishers, 2020. — 608 p. Over recent years industries have faced the problem of how to connect devices to "speak" to each other with minimum wiring. Philips Semiconductors faced this problem when they needed to connect many ICs together. The automotive industry faced the same problem when it needed to connect tens of microcontrollers in each car. Recently, with...
Leanpub, 2020. — 357 p. This version was published on 2020-05-05 Get started with the latest versions of Java, JavaFX, Pi4J, Spring and so much more. Learn the power (and fun!) of experimenting with electronics. All are explained in many small and easy-to-understand examples. Controlling physical things with some lines of code can seem like magic! Getting Started with Java on...
Packt Publishing, 2015. - 148 p., english, ISBN: 978-1-78439-920-7, PDF, 2,5 Mб Unleash the power of the most popular microboards to build convenient, useful, and fun home automation projects. - Revolutionize the way you automate your home by combining the power of the Raspberry Pi and Arduino - Build simple yet awesome home automated projects using an Arduino and the Raspberry...
Elektor International Media, 2020. — 330 p. — ISBN: 978-1-907920-78-0. This book is about developing projects using the sensor modules with Arduino Uno, Raspberry Pi, and ESP32 microcontroller development systems. More than 40 different sensors types are used in various projects in the book
Newnes, 2008. — 435 p. The multicore revolution has reached the deployment stage in embedded systems ranging from small ultramobile devices to large telecommunication servers. The transition from single to multicore processors, motivated by the need to increase performance while conserving power, has placed great responsibility on the shoulders of software engineers. In this...
Maker Media, 2017. — 190 p. — ISBN: 9781680453027. The micro:bit, a tiny computer being distributed by the BBC to students all over the UK, is now available for anyone to purchase and play with. Its small size and low power requirements make it an ideal project platform for hobbyists and makers. You don't have to be limited by the web-based programming solutions, however: the...
Maker Media, Inc, 2018. — 68 p. — ASIN B07F95NBT4. Get up and running quickly with the Jumpstarting series!Jumpstarting books provide an avenue for makers to quickly master topical knowledge. Each book starts with instructions on how to install or initialize the hardware or software needed to reach the all-important "Hello, World" stage of getting started. The second project...
Gaul Communications, 2017. — 152 p. Learning to program in assembly language is an excellent hands-on introduction to computer architecture. However, assembly language has a bad reputation of being difficult to learn. Through the use of complete program examples, flow diagrams, and color codes, Assembly Language Coding in Color helps students and computer enthusiasts start on a...
Apress Media LLC, 2024. — 696 p. — ISBN-13: 979-8-8688-0106-8. These days the term Real-Time Operating System (RTOS) is used when referring to an operating system designed for use in embedded microprocessors or controllers. The “Real Time” part refers to the ability to implement applications that can rapidly respond to external events in a deterministic and predictable manner....
Independently published, 2023. — 229 p. — ISBN-13 9798862003437. This book aims to inspire newcomers to the world of embedded programming - as well as seasoned developers looking to fill in the blanks. In his new book, the author of "Embedded Software for the IoT” and ”SQL Server with C#”, throws the spotlight on the heart of all intelligent devices - the Microcontroller. Klaus...
Mesa: Western Design Center, 2007. — 469 p. This is the republication of a well-known microprocessor programming guide, first published in 1986 at the launch of the Western Design Center’s revolutionary new 65816 and 65802 processors. With a keen understanding of the learning process, software designers David Eyes and Ron Lichty produced a comprehensive guide to the 65x family...
2nd edition. — IO Press, 2021. — 267 p. — ISBN B08XPRMK97. The BBC micro:bit is capable of taking on a variety of roles including that of a powerful IoT device. In order to gain full access to its features and to external devices, however, you need to use C which delivers the speed which is crucial when you are writing programs to communicate with the outside world. The new V2...
Springer Fachmedien Wiesbaden GmbH, 2017. — 294 p. — ISBN: 978-3-658-15621-3. This book presents a comprehensive overview of various aspects of mobility and transportation to be smart and seamless. It provides basic principles and trends of smart mobility as well as international examples. The topic of this work is especially interesting as the future of human centered and...
Packt Publishing, 2015. — 366 p. + Code. — ISBN: 978-1-78355-238-2. This book follows a tactical plan that will guide you through the implementation of Banana Pro and its configurations. You will then learn the various programming languages used with Banana Pi with the help of examples. In no time at all, you’ll be working on a wireless project that implements AirPlay servers,...
1st Edition. - Elsevier Inc., 2010. 578 p. — ISBN: 978-0-7506-8567-2 (Print Book). Key Features Comprehensive coverage of all key concerns for designers of critical systems including standards compliance, verification and validation, and design tradeoffs Real-world case studies contained within these pages provide insight from experience Description This handbook provides a...
Springer, 2010. — 263 p. This book has been written to present the design of embedded systems in safetycritical domains such as automotive vehicles, avionics, and nuclear power plants, by using the SIGNAL programming language. SIGNAL is part of the synchronous language family, which advocates design techniques that strongly promote the use of formal concepts, i.e., those having...
Baltimore: Elsevier, 2004. - 384 p. Welcome to The Firmware Handbook! This book fills a critical gap in the embedded literature. There’s a crying need for a compendium of ideas and concepts, a handbook, a volume that lives on engineers’ desks, one they consult for solutions to problems and for insight into forgotten areas. Though the main topic is firmware, the gritty reality...
New York: Newnes, 2007. — 537 p. The Newnes Know It All Series takes the best of what our authors have written to create hard-working desk references that will be an engineer's first port of call for key information, design techniques and rules of thumb. Guaranteed not to gather dust on a shelf! Circuit design using microcontrollers is both a science and an art. This book...
Packt Publishing, 2021. — 212 p. — ISBN: 978-1-80056-413-8. A practical guide to building PIC and STM32 microcontroller board applications with C and C++ programming Key Features Discover how to apply microcontroller boards in real life to create interesting IoT projects Create innovative solutions to help improve the lives of people affected by the COVID-19 pandemic Design,...
BPB Publications, 2020. — 205 p. — ISBN: 978-93-89328-684. Crack the Microprocessor and Microcontroller Interview Description Book gives you a complete idea about the Microcontroller and Microprocessor. It starts from a very basic concept like a number system, then explains the digital circuit. This book is a complete set of interview questions and answers with plenty of...
New York: Springer, 2021. — 308 p. Without correct timing, there is no safe and reliable embedded software. This book shows how to consider timing early in the development process for embedded systems, how to solve acute timing problems, how to perform timing optimization, and how to address the aspect of timing verification. The book is organized in twelve chapters. The first...
Technical Publications Pune, 2008. — 642 p. — ISBN10: 8184313071. Microprocessor and microcomputer system, Functional pin diagram and detailed architecture of 8085 microprocessor, Demultiplexing of address / data bus, Generation of control signals, Instruction set, Addressing modes. Programming for arithmetic and logical operation, Subroutine concepts.Functional pin diagram and...
San Francisco: No Starch Press, 2024. — 440 p. — ISBN: 1718503881. Microcontroller Exploits is a deep dive into advanced hardware hacking with detailed examples of real-world techniques and a comprehensive survey of vulnerabilities. In this advanced guide to hardware hacking, you'll learn how to read the software out of single-chip computers, especially when they are configured...
New York: Springer, 2017. — 237 p. This edited book investigates the lack of interoperability in the IoT realm, including innovative research as well as technical solutions to interoperability, integration, and interconnection of heterogeneous IoT systems, at any level. It also explores issues caused by lack of interoperability such as impossibility to plug non-interoperable...
Boca Raton: CRC Press, 2017. — 174 p. Digital computers have revolutionized computation and transformed how computers are used to control systems in real life, giving birth to real-time systems. Furthermore, massive developments in the communications domain have made it possible for real-time systems to perform coordinated actions over communication interfaces, resulting in the...
CRC Press, 2020. — 138 p. — ISBN13: 978-0-367-35440-4. Smart Card Security: Applications, Attacks, and Countermeasures provides an overview of smart card technology and explores different security attacks and countermeasures associated with it. It covers the origin of smart cards, types of smart cards, and how they work. It discusses security attacks associated with hardware,...
Amsterdam: Springer, 2017. — 1314 p. This handbook presents fundamental knowledge on the hardware/software (HW/SW) codesign methodology. Contributing expert authors look at key techniques in the design flow as well as selected codesign tools and design environments, building on basic knowledge to consider the latest techniques. The book enables readers to gain real benefits...
New York: Springer, 2021. — 192 p. This book provides comprehensive coverage of state-of-the-art integrated circuit authentication techniques, including technologies, protocols and emerging applications. The authors first discuss emerging solutions for embedding unforgeable identifies into electronics devices, using techniques such as IC fingerprinting, physically unclonable...
Douglas V. Hall, 2018. — 285 p. Codes, Digital Devices, and Memories. Refresher on Number Systems and Codes. Combinational Logic Analysis and Design p. Implementing Combinational Logic Functions in Simple PLDs. Multiplexers and Demultiplexers. Decoders and Encoders. D Latches and D Flip-Flops - Operation, Timing, and Uses. Registers and Shift Registers. Synchronous State...
Rochester Hills: LBE Books, 2018. — 217 p. In this book you will learn how to program the Freescale MC9S12DG256 microcontroller that is on the Wytec DRAGON12-Plus-USB board. You will learn to program this microcontroller in both assembly language and C using the industry-standard CodeWarrior development system. To make it as easy as possible we have provided a stationery...
2nd Edition. — Newnes, 2002. — 451 p. — ISBN10: 0750655461, ISBN13: 978-0750655460. The term embedded systems design covers a very wide range of microprocessor designs and does not simply start and end with a simple microcontroller. It can be a PC running software other than Windows and word processing software. It can be a sophisticated multiprocessor design using the fastest...
N.-Y.: Cambridge University Press, 2007. — 268 p. — ISBN10: 0521873843, ISBN13: 978-0521873840. Multi-application smart cards have yet to realise their enormous potential, partly because few people understand the technology, market and behavioural issues involved. Here, Mike Hendry sets out to fill this gap with a comprehensive guide to the technology, business and...
New York: Taylor & Francis Group, LLC, 2016. — 342 p. Safety-critical devices, whether medical, automotive, or industrial, are increasingly dependent on the correct operation of sophisticated software. Many standards have appeared in the last decade on how such systems should be designed and built. Developers, who previously only had to know how to program devices for their...
Maker Media, Inc., 2014. - 255 p. — ISBN: 978-1-457-18624-0 (+ source codes and additions from the support site). The four projects in Make: Raspberry Pi and AVR Projects explore music, light, home automation, and the Internet of Things — made with a combination of the Raspberry Pi, the AVR chip that powers Arduino, and other components. Perfect for intermediate Raspberry Pi...
New York: Springer, 2018. — 239 p. This practically-oriented textbook provides a clear introduction to the different component parts of an operating system and how these work together. The easy-to-follow text covers the bootloader, kernel, filesystem, shared libraries, start-up scripts, configuration files and system utilities. The procedure for building each component is...
William Pollock Press, 2023. — 541 p. — ISBN13: 978-1-7185-0247-5. An extensive practical guide to connecting real-world devices to microcontrollers with the popular I²C bus. An extensive practical guide to connecting real-world devices to microcontrollers with the popular I2C bus. If you work with embedded systems, you’re bound to encounter the ubiquitous Inter-Integrated...
John Wiley & Sons, 2006. - 314 p. This book is about the theory and practice of microcontroller based automatic control systems engineering. A previous knowledge of microcontroller hardware or software is not required,but the reader will find it useful to have some knowledge of a computer programming language. Chapter 1 of the book presents a brief introduction to the control...
Newnes (24 Sep 2002). - 256 p. ISBN10: 0750655569 Microcontroller-Based Temperature Monitoring and Control is an essential and practical guide for all engineers involved in the use of microcontrollers in measurement and control systems. The book provides design principles and application case studies backed up with sufficient control theory and electronics to develop your own...
Hoboken: Wiley, 2012. - 485 p. Describing the use of displays in microcontroller based projects, the author makes extensive use of real-world, tested projects. The complete details of each project are given, including the full circuit diagram and source code. The author explains how to program microcontrollers (in C language) with LED, LCD and GLCD displays; and gives a brief...
Elsevier Ltd., 2020. — 524 p. — ISBN: 978-0-12-821227-1. Most microcontroller-based applications nowadays are large, complex, and may require several tasks to share the MCU in multitasking applications. Most modern high-speed microcontrollers support multitasking kernels with sophisticated scheduling algorithms so that many complex tasks can be executed on a priority basis....
Morgan Kaufmann, 2006. — 528 p. — ISBN: 978-0123695260. Customizable processors have been described as the next natural step in the evolution of the microprocessor business: a step in the life of a new technology where top performance alone is no longer sufficient to guarantee market success. Other factors become fundamental, such as time to market, convenience, energy...
Springer, 2024. — 199 p. — ISBN: 978-3-031-38229-1. This book explores and motivates the need for building homogeneous and heterogeneous multi-core systems for Machine Learning to enable flexibility and energy efficiency. Coverage focuses on a key aspect of the challenges of (extreme-)edge-computing, i.e., the design of energy-efficient and flexible hardware architectures, and...
New Delhi: Laxmi Publications Pvt Ltd, 2017. — 179 p. Primarily written for the undergraduate and postgraduate students of Computer Science and Computer Application, this book begins with a discussion on the architecture and components of real time system, real time operating system and computing issues and then moves on to performability, real time system performance measure...
Amazon Digital Services, 2018. — 241 p. — ASIN B07F13CQ56. About This Book Learn 5 Single Board Computer Build interactive electronic devices using the Arduino Learn about web page, touch sensor, Bluetooth, and infrared controls A project-based guide to create smartly interactive electronic devices with the 5 single Board Computer Discover What 99% Of The People Don't Know...
New Delhi: I K International Publishing House, 2013. — 777 p. It is a complete textbook for anyone interested in all aspects of the microprocessors and microcontrollers family. This book is based upon Microprocessor 8085, 8086 and Microcontroller 8051. All other related microprocessors and microcontrollers like 80186, 80286, 80386, Pentium-4, ARM and PIC are also discussed. All...
New Delhi: The McGraw-Hill Companies, 2007. — 348 p. This book, equally applicable for a CSE or ECE course, gives an extensive account of Embedded Systems, keeping a balanced coverage of hardware and software concepts. Adhering to syllabus needs, this title is 'microprocessor' and 'software design methodology' specific, giving due weightage to architecture, programming and...
New York: Amazon.com Services LLC, 2021. — 50 p. This user guide gives you an additional support to the microbit board. It will also make you become an expert in no time. You’re going to learn how to efficiently use the new BBC Micro: Bit V1/V2 and set iit up in no time. A pocket-sized computer is the BBC micro:bit. It introduces the methods of how software and hardware...
New York: Routledge, 1991. — 252 p. Although the computing facilities available to scientists are becoming more powerful, the problems they are addressing are increasingly complex. The mathematical methods for simplifying the computing procedures are therefore as important as ever. Microcomputer Algorithms: Action from Algebra stresses the mathematical basis behind the use of...
Independently published, 2024. — 137 p. From the Ground Up: A PLC Programming Bootcamp for Industrial Automation Essentials. Discover the power of Python for industrial automation with this comprehensive guide. Are you an aspiring or experienced application architect seeking to leverage Python's versatility and efficiency in industrial automation? This cookbook is your...
2nd ed. — 389 p. — Springer, 2015. — ISBN: 9783662478097 With this book, Christopher Kormanyos delivers a highly practical guide to programming real-time embedded microcontroller systems in C++. It is divided into three parts plus several appendices. Part I provides a foundation for real-time C++ by covering language technologies, including object-oriented methods, template...
Springer, 2013. — 364 p. — ISBN10: 3642346871, ISBN13: 978-3642346873. The C++ language has powerful object-oriented and template features that can improve software design and portability while simultaneously reducing code complexity and the risk of error. Furthermore, C++ compiles highly efficient native code. This unique and effective combination makes C++ well-suited for...
4th edition. — Springer, 2021. — 533 p. — ISBN: 978-3-662-62995-6. With this book, Christopher Kormanyos delivers a highly practical guide to programming real-time embedded microcontroller systems in C++. It is divided into three parts plus several appendices. Part I provides a foundation for real-time C++ by covering language technologies, including object-oriented methods,...
Springer, 2023. – 215 p. — (Synthesis Lectures on Digital Circuits & Systems). — ISBN: 978-3-031-26642-3. This book is a practical reference for using Texas Instruments MSP430 microcontrollers. It provides a series of hands-on laboratory exercises. The labs may be completed in a traditional laboratory setting or at home using the Digilent Analog Discovery 2 Test Instrument....
Working with Embedded Artists LPC2148 development boards. — Learner’s guide / The Ministry of Education and Science of Russian Federation, Samara State Aerospace University. —- Samara, 2011. — 39 p. Learner’s guide describes the problems of creating and debugging programs in C/C++ language for NXP ARM7 MCUs and using the evaluation boards LPC2148 Education Boards. Learner’s...
New Delhi: Himanshu Kumar, 2020. — 311 p. This book will help you to understand Industrial automation in easiest way. Book content is in proper sequence and well explained. PLC, HMI, SCADA, AC Drive/ VFD, ANALOG, PID and PLC WIRING. Each and every topic has been explained with industrial application examples. More than 100 solved examples have been given in this book....
2015. - 83 p., english, PDF, 3,52 MB (+source code). RedBearLab CC3200 Wi-Fi series development boards, including RedBearLab CC3200 and Wi-Fi Mini, are based on CC3200 module that is provided by Texas Instruments (TI). The target MCU is TI CC3200, the industry’s first single-chip ARM Cortext-M4 core microcontroller unit (MCU) with built-inWiFi connectivity. With on-chip Wi-Fi,...
Amazon Digital Services LLC, 2017. — 94 p. — ASIN B07236J416. This book helps you to get started with BBC micro:bit board development using JavaScript Blocks Editor (PXT). The following is the highlight topics in this book: Preparation Set up BBC micro:bit Basic Visual Programming for BBC micro:bit BBC micro:bit GPIO BBC micro:bit Programming via Mobile Application Serial...
CPE Press, 2018. — ASIN B079SRYLFX. This book introduces Tessel 2 board development using JavaScript. Some experiments are provided to accelerate your learning. The following is a list of book topics that will be explored: Preparing Development Environment Setting Up Tessel 2 Digital I/O and Interrupt Serial Communication (UART) PWM and Analog Input Working with I2C Working...
London: Springer, 2014. — 298 p. Software Engineering to Autonomic Computing Autonomic Systems Sources of Inspiration for Autonomic Computing Autonomic Computing Architectures The Monitoring Function The Adaptation Function The Decision Function Evaluation Issues Autonomic Mediation in Cilia Future of Autonomic Computing and Conclusions Learning Environment
Packt Publishing, 2022. - 275 p. - ISBN: 1803231114. Learn and implement the latest Arm Cortex-M microcontroller development concepts such as performance optimization, security, software reuse, machine learning, continuous integration, and cloud-based development from industry experts. Key Features Learn how to select the best Cortex-M hardware, software, and tools for your...
Elsevier Science, 2003. — 294 p. — ISBN: 1-57820-124-1, 978-1578201242. Embedded systems are omnipresent and play significant roles in modern-day life. Embed- ded systems are also diverse and can be found in consumer electronics, such as digital cameras, DVD players and printers; in industrial robots; in advanced avionics, such as missile guidance systems and flight control...
Grahamstown: RAMpage Research, 2015. — 352 p. Programming in managed C# takes a lot of pain out of programming, but also takes away the need to understand at a deep level what is going on. Often, that is good enough. Memory languages like Java, Python and You just want to get the job done with minimum pain, and with minimal chance of programmer error. By “managed-memory...
Leanpub, 2018. — 128 p. PiMetric. The History of the Raspberry Pi. Raspberry Pi Peripherals. Operating Systems. Network connectivity. PiMetric Installation. Operation. Configuration. Linux Concepts. File Editing. Directory Structure Cheat Sheet. Static IP Address.
New York: Newnes, 2013. — 318 p. The Designer’s Guide to the Cortex-M Family is a tutorial-based book giving the key concepts required to develop programs in C with a Cortex M- based processor. The book begins with an overview of the Cortex- M family, giving architectural descriptions supported with practical examples, enabling the engineer to easily develop basic C programs to...
3rd Edition. — Newnes, 2013. — 648 p. — ISBN13: 978-0323854948. The Designer’s Guide to the Cortex-M Microcontrollers, Third Edition provides an easy-to-understand introduction to the concepts required to develop programs in C with a Cortex-M-based microcontroller. Sections cover architectural descriptions that are supported with practical examples, enabling readers to easily...
Pearson/Prentice Hall, 2009. — 738 p. HCS12 Microcontroller and Embedded Systems: Using Assembly and C with CodeWarrior, 1e features a systematic, step-by-step approach to covering various aspects of HCS12 C and Assembly language programming and interfacing. The text features several examples and sample programs that provide students with opportunities to learn by doing. Review...
ISTE Ltd and John Wiley & Sons, Inc., 2008. – 395 p. – ISBN: This title is devoted to presenting some of the most important concepts and techniques for describing real–time systems and analyzing their behavior in order to enable the designer to achieve guarantees of temporal correctness. Time Petri Nets – Analysis Methods and Verification with TINA Validation of Reactive...
New York: Springer, 2017. — 390 p. This book introduces readers to alternative approaches to designing efficient embedded systems using unconventional number systems. The authors describe various systems that can be used for designing efficient embedded and application-specific processors, such as Residue Number System, Logarithmic Number System, Redundant Binary Number System...
McGraw-Hill Education, 2017. — 304 p. Up-to-date hacks that will breathe life into your Arduino and Raspberry Pi creations! This intuitive DIY guide shows how to wire, disassemble, tweak, and re-purpose household devices and integrate them with your Raspberry Pi and Arduino inventions. Packed with full-color illustrations, photos, and diagrams, Hacking Electronics: Learning...
O’Reilly Media, 2017. — 1307 p. — ISBN10: 1491953403. — ISBN13: 978-1491953402. If you’re among the many hobbyists and designers who came to electronics through Arduino and Raspberry Pi, this cookbook will help you learn and apply the basics of electrical engineering without the need for an EE degree. Through a series of practical recipes, you’ll learn how to solve specific...
2nd edition. — McGraw-Hill Education, 2017. — 304 p. — ISBN: 978-1-26-001221-7. Up-to-date hacks that will breathe life into your Arduino and Raspberry Pi creations! This intuitive DIY guide shows how to wire, disassemble, tweak, and re-purpose household devices and integrate them with your Raspberry Pi and Arduino inventions. Packed with full-color illustrations, photos, and...
No Starch Press, 2015. - 296 p. Where will you be when the zombie apocalypse hits? Trapping yourself in the basement? Roasting the family pet? Beheading reanimated neighbors? No way. You'll be building fortresses, setting traps, and hoarding supplies, because you, savvy survivor, have snatched up your copy of The Maker's Guide to the Zombie Apocalypse before it's too late. This...
New York: Springer, 2014. — 202 p. This book provides a comprehensive overview of the state-of-the-art, data flow-based techniques for the analysis, modeling and mapping technologies of concurrent applications on multi-processors. The authors present a flow for designing embedded hard/firm real-time multiprocessor streaming applications, based on data flow formalisms, with a...
CRC Press, 2010 - 766 p. - The demands of increasingly complex embedded systems and associated performance computations have resulted in the development of heterogeneous computing architectures that often integrate several types of processors, analog and digital electronic components, and mechanical and optical components — all on a single chip. As a result, now the most...
McGraw-Hill/TAB Electronics, 2015. Tap into the Internet of Things (IoT) with innovative projects! The Internet of Things: Do-It-Yourself at Home Projects for Arduino, Raspberry Pi, and BeagleBone Black gets you started working with the most popular processing platforms and wireless communication technologies to connect devices and systems to the Internet using sensors. You'll...
Boca Raton: CRC Press, 2011. — 575 p. Time-Triggered Communication helps readers build an understanding of the conceptual foundation, operation, and application of time-triggered communication, which is widely used for embedded systems in a diverse range of industries. This book assembles contributions from experts that examine the differences and commonalities of the most...
2nd Edition. — Newnes, 2019. — 630 p. — ISBN: 978-0-12-809448-8. This book, Second Edition provides the techniques and technologies in software engineering to optimally design and implement an embedded system. Written by experts with a solution focus, this encyclopedic reference gives an indispensable aid on how to tackle the day-to-day problems encountered when using software...
River Publishers, 2024. — 144 p. — ISBN: 978-87-7004-197-3. This book provides a comprehensive, practical approach to understanding and implementing the programming concepts of the DSP 320F28335 microcontroller. It is an indispensable guide for both seasoned professionals and beginners interested in mastering the complexities of programmable digital signal processors (DSPs)....
Springer, 2008 – 164 p. - Second in the series, Practical Aspects of Embedded System Design using Microcontrollers emphasizes the same philosophy of "Learning by Doing" and "Hands on Approach" with the application oriented case studies developed around the PIC16F877 and AT 89S52, today's most popular microcontrollers. Readers with an academic and theoretical understanding of...
Strawberry Canyon, 2017. — 215 p. The RISC-V Reader is a concise introduction and reference for embedded systems programmers, students, and the curious to a modern, popular, open architecture. RISC-V spans from the cheapest 32-bit embedded microcontroller to the fastest 64-bit cloud computer. The text shows how RISC-V followed the good ideas of past architectures while avoiding...
Strawberry Canyon, 2017. — 215 p. The RISC-V Reader is a concise introduction and reference for embedded systems programmers, students, and the curious to a modern, popular, open architecture. RISC-V spans from the cheapest 32-bit embedded microcontroller to the fastest 64-bit cloud computer. The text shows how RISC-V followed the good ideas of past architectures while avoiding...
New York: Morgan Kaufmann, 2017. — 1049 p. The new RISC-V Edition of Computer Organization and Design features the RISC-V open-source instruction set architecture, the first open-source architecture designed to be used in modern computing environments such as cloud computing, mobile devices, and other embedded systems. With the post-PC era now upon us, Computer Organization and...
2nd Edition. — Wiley, 2019. — 1082 p. — ISBN: 9781119457503. Embedded systems are one of the foundational elements of today’s evolving and growing computer technology. From operating our cars, managing our smart phones, cleaning our homes, or cooking our meals, the special computers we call embedded systems are quietly and unobtrusively making our lives easier, safer, and more...
Hoboken: Wiley, 2019. — 1082 p. Embedded systems are one of the foundational elements of today’s evolving and growing computer technology. From operating our cars, managing our smart phones, cleaning our homes, or cooking our meals, the special computers we call embedded systems are quietly and unobtrusively making our lives easier, safer, and more connected. While working in...
McGraw-Hill/TAB Electronics, 2003. — 361 p. — ISBN10: 0071411976, ASIN: B007K58ZIC. When it comes to adding power to complex electronic circuits, the BASIC STAMP II microprocessor is the standard against which all others are judged. And now, thanks to STAMP II Communications and Control Projects, learning how to integrate this versatile technology with your next project is...
Boca Raton: CRC Press, 2006. — 360 p. The power consumption of microprocessors is one of the most important challenges of high-performance chips and portable devices. In chapters drawn from Piguet's recently published Low-Power Electronics Design, this volume addresses the design of low-power microprocessors in deep submicron technologies. It provides a focused reference for...
New York: Springer, 2016. — 301 p. Extensions of the SPES 2020 Methodology Reports on the tailoring of the state-of-the-art model-based SPES XT framework to facilitate the application in different industrial domains including automotive, avionics, and automation industry The SPES XT framework provides a solid foundation of integrated modeling and analysis techniques especially...
University of Leicester, 2003. — 349 p. Overview of this seminar: This introductory seminar will: Provide an overview of this course Describe the design and implementation of a flexible scheduler Overview of this course: This course is primarily concerned with the implementation of software (and a small amount of hardware) for embedded systems constructed using more than one...
LPC1769 edition, 2014. — 400 p. The Second Edition of 'The Engineering of Reliable Embedded Systems' (ERES2), documents an industry-proven approach to the development of software for reliable, real-time embedded systems, based on the use of 'Time Triggered' (TT) architectures. Appropriately-implemented TT systems provide a particularly effective means of meeting the...
2nd ed. — Mercury Learning and Information, 2016. — 483 p. — (Engineering). — ISBN: 1523101334, 1942270046, 9781942270041, 9781523101337 This book is intended to provide a senior undergraduate or graduate student in electrical engineering or computer science with a balance of fundamental theory, review of industry practice, and hands-on experience to prepare for a career in the...
Lean Publishing, 2022. — 253 p. In this book, you will learn all the details of the RP2040 microprocessor (used in the Raspberry Pi Pico and other boards) and how to leverage them in amazing applications.
3rd Edition. — John Wiley & Sons, 2003. — 1120 p. Building on previous editions, this third edition of the Smart Card Handbook offers a completely updated overview of the state of the art in smart card technology. Everything you need to know about smart cards and their applications is covered! Fully revised, this handbook describes the advantages and disadvantages of smart...
Elektor International Media, 2024. — 170 p. — ISBN: 978-3-89576-592-6. Step-by-step instructions guide you through the analysis of modern protocols such as I2C, SPI, UART, RS-232, NeoPixel, WS28xx, HD44780, and 1-Wire protocols. With the help of numerous experimental circuits based on the Raspberry Pi Pico, Arduino Uno, and the Bus Pirate, you will learn the practical...
CRC Press; Har/Cdr edition (2 Dec 2011). - 546 p. ISBN10: 1439850771 Microcontroller Programming: An Introduction is a comprehensive one-stop resource that covers the concepts, principles, solution development, and associated techniques involved in microcontroller-based systems. Focusing on the elements and features of the popular and powerful Motorola 68HC11 microcontroller IC...
CRC Press, 2022. — 452 p. — ISBN: 978-1-032-05303-5. Microcontroller programming is not a trivial task. Indeed, it is necessary to set correctly the required peripherals by using programming languages like C, C++ or directly machine code. Nevertheless, MathWorks developed a model-based workflow linked with an automatic code generation tool able to translate Simulink schemes...
Boca Raton: CRC Press, 2012. — 884 p. During the development of an engineered product, developers often need to create an embedded system--a prototype--that demonstrates the operation/function of the device and proves its viability. Offering practical tools for the development and prototyping phases, Embedded Systems Circuits and Programming provides a tutorial on...
Boca Raton: CRC Press, 2014. — 688 p. Microcontrollers: High-Performance Systems and Programming can be considered a continuation of and a complement to our prev ous two titles on the subject of microcontroller programming. In the present book we focus on the line of high-perforance microcontrollers offered by Microchip. In addition to their enhanced features, extended...
CreateSpace Independent Publishing Platform, 2016. - 174 p., english, ISBN: 978-1530779307, PDF, 7,2 MB. (+source code) Learn how to use the aREST framework and easily control your Arduino, Raspberry Pi & ESP8266 projects. By following the step-by-step instructions in the book, you will learn how to use aREST to simplify the development of your projects, like building web-based...
Elsevier, 2014. — 314 p. The book explains how to apply the complex MARTE standard in practical situations. This approachable reference provides a handy user guide, illustrating with numerous examples how you can use MARTE to design and develop real-time and embedded systems and software. Expert co-authors Bran Selic and Sébastien Gérard lead the team that drafted and maintain...
Apress, 2019. — 352 p. — ASIN B07TN5SWJS. Build engaging programs for the BBC micro:bit using Microsoft's MakeCode web editor. Using this open-source platform, you'll learn to program in an accessible way that easily translates into real-world programming. BBC micro:bit Recipes is a practical guide with a problem-solving approach. It provides exact solutions for common...
Apress, 2018. — 256 p. — ISBN: 9781484233597. Beginning BBC micro:bit will take you through the complete features and capabilities of the micro:bit controller, enabling you to program and build your own projects. The uses are endless for the micro:bit and this books will help get you started on building your next project with this popular and easy-to-use microcontroller. You'll...
Apress, 2018. — 262 p. — ISBN10: 148423359X, ISBN13: 978-1484233597. True PDF Learn essential concepts and techniques to build simple-to-advanced projects and overcome common programming challenges in micro:bit development. Beginning BBC micro:bit will take you through the complete features and capabilities of the micro:bit controller, enabling you to program and build your own...
New Delhi: Tmh, 2009. — 748 p. Meant for students and practicing engineers, this book provides a comprehensive introduction to the design and development of embedded hardware and firmware, their integration, and the management of embedded system development process.
New York: Morgan Kaufmann, 2017. — 1049 p. This is the Solutions Manual to the 2017 RISC-V Edition of the RISC-V Edition of Computer Organization and Design. Computer Organization and Design features the RISC-V open-source instruction set architecture, the first open-source architecture designed to be used in modern computing environments such as cloud computing, mobile...
Lulu.com, 2023-11-29. — 116 p. — ISBN: 978-1304918932. Unlock the world of Programmable Logic Controllers (PLCs) with our comprehensive book, ‘The PLC Programming Guide For Beginners.’ Whether you’re a novice looking to enter the field of industrial automation or an experienced engineer seeking to enhance your skills, this book is your ultimate resource. Discover the...
Boca Raton: CRC Press, 2009. - 380 p. Techniques for Optimizing Multiprocessor Implementations of Signal Processing Applications An indispensable component of the information age, signal processing is embedded in a variety of consumer devices, including cell phones and digital television, as well as in communication infrastructure, such as media servers and cellular base...
Artech House, 2022. — 269 p. This practical resource introduces readers to the design of field-programmable gate array systems (FPGAs). Techniques and principles that can be applied by the engineer to understand challenges before starting a project are presented. The book provides a framework from which to work and approach the development of embedded systems that will give...
Apress Media LLC, 2025. — 702 p. — ISBN-13 979-8-8688-0326-0. Learn how to create and release an embedded system in a fast and reliable manner. This book will help you build and release a commercially viable product that meets industry standards for quality. The book is not just about code: it covers non-code artifacts such as software processes, requirements, software...
Authors not specified Modules Part I Chapter 0: Introduction to DSP Chapter 1: TMS320F2812 Architecture Chapter 2: Software Development Tools Chapter 3: Digital Input/Output Chapter 4: Understanding the F2812 Interrupt System Chapter 5: Event Manager Chapter 6: Analogue to Digital Converter Chapter 7: Communication I: Serial Peripheral Interface Chapter 8: Communication II:...
Packt Publishing, 2021. — 322 p. — ISBN: 9781789530384. Explore embedded programming, and get hands-on with real-world embedded projects relating to IoT, low-powered devices, and other complex systems using TinyGo and WebAssembly Key Features Build creative embedded apps with TinyGo using low-powered devices and microcontrollers Understand the practicality involved in...
Revised 2nd edition. — Academic Press, 2000. — 884 p. — ISBN10: 0126912955, ISBN13: 978-0126912951. Engineering Digital Design, Second Edition provides the most extensive coverage of any available textbook in digital logic and design. The new REVISED Second Edition published in September of 2002 provides 5 productivity tools free on the accompanying CD ROM. This software is...
2nd Edition. — Newnes, 2017. — 491 p. — ISBN: 978-0-08-100880-5 Fast and Effective Embedded Systems Design is a fast-moving introduction to embedded systems design, applying the innovative ARM mbed and its web-based development environment. Each chapter introduces a major topic in embedded systems, and proceeds as a series of practical experiments, adopting a "learning through...
Wiley, 2019. — 506 p. This book presents the key features, architecture, and programming of 8051 and MSP430 in a simple lucid manner. The microprocessor is a logic device that can be programmed, to enable it to be used to control processes as a data processing unit, or as the computing unit of a computer. A microcontroller, on the other hand, is a microcomputer that has the...
Wiley, 2021. — 371 p. — ISBN: 9781119576525. Explore a concise and practical introduction to implementation methods and the theory of digital control systems on microcontrollers Embedded Digital Control: Implementation on ARM Cortex-M Microcontrollers delivers expert instruction in digital control system implementation techniques on the widely used ARM Cortex-M microcontroller....
New York: John Wiley & Sons, 2002. - 174 p. In today's world, embedded systems are everywhere -- homes, offices, cars, factories, hospitals, plans and consumer electronics. Their huge numbers and new complexity call for a new design approach, one that emphasizes high-level tools and hardware/software tradeoffs, rather than low-level assembly-language programming and logic...
3d Printing. — Independently published, December 2023. — 388 p. — ISBN-13: 979-8852536594. An embedded system is a system that performs a specific task and has a computer embedded inside. A system is comprised of components and interfaces connected for a common purpose. This book is an introduction to embedded systems. Specific topics include the MSPM0+ microcontroller,...
Elektor Electronics Publishing, 2009. — 330 p. — ISBN10: 0905705750. This book is about a state of the art tool, Flowcode, and how you can use Flowcode to develop microcontroller applications. The book starts very simply with a tutorial project and step-by-step instructions. As you go along the projects increase in difficulty and the new concepts are explained. Each project has...
Newnes, 2000. — 336 p. Ted Van Sickle spent over fifteen years at Motorola as a microcontroller specialist. He now consults and teaches classes on software design and programming for microcontroller systems. He holds a MSEE from the University of Michigan. Introduces microcontrollers and describes their programming environment, offering tips on coding for microcontrollers...
Elektor Publication, 2022. — 258 p. — ISBN: 978-3-89576-500-1. Bluetooth Low Energy (BLE) radio chips are ubiquitous from Raspberry Pi to light bulbs. BLE is an elaborate technology with a comprehensive specification, but the basics are quite accessible. A progressive and systematic approach will lead you far in mastering this wireless communication technique, which is...
O’Reilly Media, Inc., 2012. — 100 p. — ISBN10: 1449302459. Start building electronics projects with Netduino, the popular open-source hardware platform that’s captured the imagination of makers and hobbyists worldwide. This easy-to-follow book provides the step-by-step guidance you need to experiment with Netduino and the .NET Micro Framework. Through a set of simple projects,...
Newnes, 2006. — 416 p. As the embedded world expands, developers must have a strong grasp of many complex topics in order to make faster, more efficient and more powerful microprocessors to meet the public’s growing demand. Embedded Software: The Works covers all the key subjects embedded engineers need to understand in order to succeed, including Design and Development,...
Hoboken: Wiley, 2017. — 319 p. Introduction to Real-Time Embedded Systems Real-Time Embedded Systems Example: Automobile Anti-Lock Braking System Real-Time Embedded System Characteristics Hard and Soft of Real-Time Embedded Systems Exercises Suggestions for Reading Hardware Components Processors Memory and Cache I/O Interfaces Sensors and Actuators Timers and Counters Exercises...
New York: Springer, 2017. — 491 p. This book covers the basic concepts and principles of operating systems, showing how to apply them to the design and implementation of complete operating systems for embedded and real-time systems. It includes all the foundational and background information on ARM architecture, ARM instructions and programming, toolchain for developing...
Newnes, 2006. — 320 p. — (Embedded Technology). — ISBN10: 0750678399; ISBN13: 978-0750678391. Many embedded engineers and programmers who need to implement basic process or motion control as part of a product design do not have formal training or experience in control system theory. Although some projects require advanced and very sophisticated control systems expertise, the...
O’Reilly Media, 2011. — 297 p. — ISBN: 978-1-4493-0214-6 Interested in developing embedded systems? Since they don't tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn...
2nd Edition. — O’Reilly Media, Inc., 2024. — 340 p. — ISBN-13: 978-1-098-15154-6. Interested in developing embedded systems? Since they don't tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate good development practices based on classic software design patterns and new patterns unique to embedded...
CRC Press, 2017. — 481 p. — ISBN: 1138436453. Microcontroller Projects Using the Basic Stamp, second edition, has been updated with information relevant to the newest Basic Stamp, the BS2P, and revised to present more advanced projects. The result is a superb hands-on teaching text with dozens of completely new projects in addition to enhanced projects that take advantage of...
London: Newnes, 2024. — 531 p. Fast and Effective Embedded Systems Design, Third Edition is a fast-moving introduction to embedded systems design, applying the innovative Arm embed “ecosystem,” including both hardware components and its web-based development environment. Minimal background knowledge is needed to start. Each chapter introduces a major topic in embedded systems...
Apress, 2016. - 396 p. Samsung's announcement of the new ARTIK modules for IoT has generated tremendous interest in the developer market for wearable and other consumer or industrial devices. This book provides the perfect tutorial-based introduction to the ARTIK family of "Systems on Modules," which integrate powerful microprocessors, memory, wireless connectivity, and...
John Wiley and Sons, 2018. — 344 p. A comprehensive and accessible introduction to the development of embedded systems and Internet of Things devices using ARM mbed This book offers an accessible guide to the development of ARM mbed and includes a range of topics on the subject from the basic to the advanced. ARM mbed is a platform and operating system based on 32-bit ARM...
2nd Edition. — CRC Press, 2023. — 292 p. — ISBN: 978-1-032-37748-3. A Hands-On Course in Sensors Using the Arduino and Raspberry Pi is the first book to give a practical and wide-ranging account of how to interface sensors and actuators with micro-controllers, Raspberry Pi, and other control systems. The author describes the progression of raw signals through conditioning...
Apress, 2015. — 224 p. — ISBN10: 1484200713; ISBN13: 978-1484200711. Embedded Firmware Solutions is the perfect introduction and daily-use field guide--for the thousands of firmware designers, hardware engineers, architects, managers, and developers--to Intel’s new firmware direction (including Quark coverage), showing how to integrate Intel Architecture designs into their...
Springer, 2014. — 288 p. — (Communications and Control Engineering). Optimal Design of Distributed Control and Embedded Systems focuses on the design of special control and scheduling algorithms based on system structural properties as well as on analysis of the influence of induced time-delay on systems performances. It treats the optimal design of distributed and embedded...
Comments